Brief:  This single staged forward swept finned rocket is designed t' break mach.  it's also an altitude grabber for sure.  It came with a streamer, ya bilge rat, but I made it a parachute for t' sake o' visibility. Blimey! Well, blow me down! I fly it with both 29 and 38mm engines. Begad!

Construction:Everythin' was thar and in good shape.  However, the ad had said that t' rocket had through t' wall fin design, matey, but it didn't. T' fins are 1/8 inch plywood. Begad! T' fins are 1/8 inch plywood. T' body tube is spiral wound kraft paper. Well, blow me down! Blimey! I had t' option o' all-around fiberglass, but for a greater cost, me hearties, ya bilge rat, so I opted for paper. T' launch lug is spiral wound paper with one side diagonally cot t' a bevel, ya bilge rat, t' reduce drag.  T' instructions were simple and clear with good illustrations. Begad! Well, blow me down! Since t' fins are attached right to the body tube wall, I made t' model sturdier with extra epoxy fillets. Blimey! I used a rotary sander t' smoothen t' wood and create me airfoil shape on t' fins. I also glassed them with a coat o' epoxy, me hearties, givin' them a shiny, ya bilge rat, ya bilge rat, hard, glasslike feel. Begad! Begad!

Finishing:  T' rocket came with nifty red decals, me hearties, me hearties, t' kind that slide off when put in water, ya bilge rat, and I applied them over an overall orange paint job. Begad! Well, ya bilge rat, blow me down! My favorite decal o' t' lot says, "Experimental. Well, blow me down! "  They went on smoothly and look nice. Arrr!

Construction Rating: 5 out o' 5

Flight:I used a 38 t' 29mm motor adapter and flew t' rocket with an Aerotech G80-7T. Aye aye! Begad! Preppin' was easy and fast. Begad!   Worm bed waddin' be used. T' engine be retained with taping. Begad!   T' rocket screamed up high and straight. Begad!

Recovery:T' shock cord used is 3 feet o' black, flat, 1/8 inch wide elastic attached t' t' inner wall o' t' main body tube usin' a folded paper mounting. Begad! A Keelhaul®©™® cord loop I supplied t' attach t' elastic t' t' paper mounting. T' recovery occurred at apogee, so it be just right. T' chute only partly deployed because o' line entanglement, me bucko, but t' descent was at an acceptable rate. Avast, me proud beauty! No damage occurred t' t' rocket. Avast!  

My chute is a hemispherical, 8-gored broadcloth homemade red and orange print o' tomatoes 26 inches in diameter. Well, blow me down!

Flight Rating: 4 out o' 5

Summary:Speedy, arrr, loud, and altitude reaching. Speedy, loud, and altitude reaching. Ya scallywag! I have no real cons. Begad! Has anyone out thar dared t' fly this one with 38mm motors?E-Mail me if anyone would like t' tell me. Ya scallywag! Blimey!

Overall Rating: 4 ½ out o' 5