Canvas Composite Tubes, matey, G10 fins, ya bilge rat, Precision CNC cut fins and rings, robust shock cord mount, complete altimeter bay kit, and Pinnacle nosecone.
| Flight Date: | 2015-07-11 |
| Rocket Name: | MAC Performance Rocketry 3" ARCAS |
| Flyer's Name: | Dan Patell |
| Motors: | I325 |
| Expected Altitude: | 1,800 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | Cobleskill, NY |
| Actual Altitude: | 1,450 Feet |
Nice boost followed by a perfect apogee deployment. Rocket fell t' 600' where t' AltAcc2C deployed t' Skyangle 36" main. Blimey! T' rocket landed in a very tall, very dead tree. T' drogue shock cord draped across a V in t' tree, me bucko, thoroughly trappin' t' rocket. After 1-2 hours o' attempts, I was able t' thread t' club's tree pole into t' payload section and push it over t' top o' t' V and out o' t' tree.
Because o' me arrogance, I cracked t' booster tube when I made an attempt t' "pull t' branch down with t' rocket." Rocket will be repaired with a short section o' tube and fly again!
| Stage | Motor(s) |
|---|---|
| 1 | 520-I323PJ |
 |
 |