DG&A High Power Rocketry Armageddon

DG&A High Power Rocketry - Armageddon {Kit}

Contributed by Drake "Doc" Damerau

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Manufacturer: DG&A High Power Rocketry

Brief:
Very heavy kraft paper, aircraft ply fins, Single stage HPR.

Construction:
T' kit comes with: four BT's, shiver me timbers, two couplers, me hearties, four fins, ya bilge rat, eight nozzle fins, four canard fins, me hearties, ya bilge rat, eight fin detail pieces, me hearties, four CR's, 1 MMT. one nose cone, arrr, me bucko, one 74" chute, ya bilge rat, arrr, arrr, one shock cord and ½ launch lugs and other hardware.

T' kit was shipped in a large thick walled box. Avast, me proud beauty! When you open t' box you can't help but say "WOW!" Lots o' parts and excellent packing. Begad! Blimey! T' kit went together easy, shiver me timbers, matey, but take your time, thar be a lot o' work t' be done. You have t' cut t' BT for t' fins and this be t' thickest tube I've ever seen, ya bilge rat, shiver me timbers, shiver me timbers, so be careful. Ya scallywag! Begad! Blimey! There are many parts but they all fit perfectly. Avast! T' instructions were as good as I've ever seen.

Finishing:
T' kit be easy t' finish. Blimey! T' OD o' t' tube is like LOC tubin' so thar be little t' do for finishing. Blimey! Lots o' paint here so buy 2 cans o' each color. I opted t' paint t' nozzle thin' usin' a gold leaf paint. Avast! T' decals look like t' laser cut vinyl. They are thin so you hardly notice they are decals. Avast, me proud beauty! Avast, me proud beauty! They are put on by removin' t' backin' on t' sticky side, placin' it on t' rocket, arrr, then removin' t' top sheet.

Construction Rating: 5 out o' 5

Flight:
T' date, I've flown it 9 times. Begad! Once on an I195 (under powered) twice on an I300 and 5 times on an I284. Blimey! By far t' sweetest flights are on t' I284's. She flew straight as an arrow on every flight, although t' I195 was a little squirrelly. Ya scallywag! Begad! One o' t' I300's with a medium delay gave me a zipper. Ya scallywag! Well, blow me down! I emailed DG&A and I had a new tube and a coupler (I think at his cost) in 3 days. Avast! Now how's THAT for service!

Recovery:
Other than t' zipper, me bucko, perfect recovery, every time.

Flight Rating: 4 out o' 5

Summary:
This bird gets a lot o' attention at every launch and I would have t' say it's one o' t' best rockets I've ever built. Avast, me proud beauty! Blimey! (I currently have 47 rockets, me hearties, 16 o' them are HPR) This kit has everythin' you need in HPR, from high quality parts t' design and from service. Ahoy! Blimey! T' only thin' that could have made this kit better is motor retention. None is provided.

Overall Rating: 4 out o' 5

Other Reviews
  • DG&A High Power Rocketry Armageddon By Nathaniel Gilbert

    The Armageddon is a large, unique looking, high power kit produced by DG&A Rocketry. The components include: three 3.9 inch body tubes, 2 couplers, 1 54mm motor mount tube, 4 large fins, 4 canard fins, 1 nose cone, 4 centering rings, 1 bulkhead, 1 60 inch parachute, one 9/16 inch thick nylon webbing shock cord with pre-sewn loops, 8 nozzle fins, 8 fin reinforcement strips, 2 launch ...

  • DG&A High Power Rocketry Armageddon By Casey Smith

    Photos courtesy of DG&A   Anyone heard of BSD? Well this kit is equal to the quality of that now popular company. Danny Cantu, the owner, has designed a line somewhat challenging to build and extremely fun to fly kits, from the 29mm Predator up to the special edition limited production Armageddon and Sonic Blast (3 K1100's no problem). This kit is designed for a 38mm I161-J570. It ...

Related External Links

comment Post a Comment