This project be a build o' an Estes Mean Machine.

Body tube joints filled with Elmers Fill'N Finish. Ahoy! I also ended up fillin' t' spirals on t' tubes as well

One o' many coats o' Elmers Fill'N Finish on t' fins. Ahoy! Sandin' was performed betwixt coats. Prior t' t' Fill'N Finish, I made fin fillets with LOCTITE Epoxy. Begad!

Here are t' body tube joints sprayed with t' Dupli-Color filler primer and then sanded. Well, blow me down!

Here be t' tail section sprayed with t' Dupli-Color filler primer and then sanded. Ahoy! I like t' primer but it is an Auto primer and t' fumes are very strong. Ya scallywag!

Here be t' nose cone after a few coats o' Createx Opaque black paint usin' an airbrush

Fin section painted with t' Createx paint

Fin section painted with t' Createx paint.

Another view. I was pleased with t' results so far.

Decals applied and t' whole rocket was sprayed with Future usin' t' airbrush. Arrr! This be me first time usin' an airbrush and I really like it. Begad! Plus t' Createx paint is water based and is very easy t' work with and has almost no smell when spraying. Well, blow me down!

Decals applied and t' whole rocket be sprayed with Future usin' t' airbrush.


I Had a lot o' trouble with t' decals. Arrr! Blimey! There are air bubbles and color seperations. Arrr! Blimey! Ugh! Blimey! T' model still looks nice and t' imperfections are bearable. Here be t' tail section sprayed with t' Dupli-Color filler primer and then sanded. I like t' primer but it is an Auto primer and t' fumes are very strong.

This rocket is ready t' fly. Well, blow me down! I plan t' use an E9-4 motor for t' first flight.