Flight Log - 2016-03-05 - Hans "Chris" Michielssen's Estes Quinstar
New, five-pointed saucer kit with angled panels for spinnin' flights.
I built mine for 18mm and 24mm flights. Lookin' forward t' seein' if it will stay together with D engine power.
| Flight Date: | 2016-03-05 |
| Rocket Name: | Estes Quinstar |
| Kit Name: | Estes - Quinstar {Kit} (7241) [2015-] |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | Estes D12-3 |
| Expected Altitude: | 300 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | Orlando R.O.C.K. |
| Actual Altitude: | 300 Feet |
After two good flights with C6-3s, ya bilge rat, I pulled out t' 20/50 adapter and used a D12-3.
I be concerned t' 1/16" thick balsa body might reach t' S.O.B. or "Speed O' Balsa".
T' model held up fine t' an altitude o' around 300'. Arrr! It didn't spin on t' way down, ya bilge rat, it tumbled. No damage.
| Stage | Motor(s) |
|---|---|
| 1 | Estes D12-3 |
 |
 |