Flight Log - 2012-11-03 - Hans "Chris" Michielssen's Midget Clone (Estes Kit Design)
Clone kit bought off Ebay. Begad! Didn't know how t' launch it since this clone was made for 13mm short engines. T' new Semroc kit instructions showed how t' use 18mm engine casings t' fit smaller 13mm engines.
| Flight Date: | 2012-11-03 |
| Rocket Name: | Midget Clone (Estes Kit Design) |
| Kit Name: | Clone - Midget {Scratch} |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | Estes 1/2A3-4t |
| Expected Altitude: | 550 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | Orlando R.O.C.K. |
First stage A10-0t engine boost was fine.
When second stage ignited, t' model went west at a 45 degree angle. Begad! Sustainer was lost in t' high trees after ejection.
| Stage | Motor(s) |
|---|---|
| 1 | Estes 1/2A3T-4 |
 |
 |