This is a modified version o' t' Bay Area Rocketry 38mm kit. I moved t' motor tube 2" aft, added a third centerin' ring, and an Aeropack retainer. I also used a kevlar y-bridle, 15' o' 9/16" tubular nylon, and a KSR 30H chute. All connections are made with 1/4" quicklinks. Begad! I added 5 ounces o' ballast t' t' nosecone so that I can launch on I225 motors and similar.
| Flight Date: | 2015-02-14 |
| Rocket Name: | BAR Crayon 38mm |
| Flyer's Name: | K Sonesen |
| Motors: | I212-8 |
| Expected Altitude: | 2,000 Feet |
| Wind Speed: | 3.00 mph |
| Launch Site: | LUNAR - Snow Ranch |
This flight went up quite a bit higher than expected. No altimeter on board so I will only say that at apogee t' 30" black and white striped chute be just about invisible t' me but I could just make out t' pink crayon.
| Stage | Motor(s) |
|---|---|
| 1 | CTI 364I212-14A-8 |
![]() |
![]() |