This is a Polecat Aerospace kit featurin' fiberglass nose cone and fiberglass wrapped body tube. 54mm motor tube can be adapted with Aeropack fixture t' 38mm. 54mm Aeropack motor retainer is used. Ya scallywag! No nose weight was added or needed per kit instructions. Avast, me proud beauty! I created an altimeter bay in t' nose cone and planned t' use t' Cable Cutter for main deploy but have heard thar are reliability problems. Ya scallywag! T' Jolly Logic Chute Release is me preferred solution now for t' main deploy.
| Flight Date: | 2018-03-10 |
| Rocket Name: | Goblin 5.5 |
| Kit Name: | Polecat Aerospace - Goblin (5.5") {Kit} |
| Flyer's Name: | K Sonesen |
| Motors: | J420-9 |
| Expected Altitude: | 2,000 Feet |
| Certification Flight: | Level 2 |
| Wind Speed: | 4.00 mph |
| Launch Site: | LUNAR - Snow Ranch |
| Actual Altitude: | 2,089 Feet |
This was me L2 certification flight. A wind gust hit me rocket near apogee and caused an arcin' flight instead o' t' normal staright up flight pattern. This resulted in a long retrieval hike. A successful flight other than that.
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech J420R-9 |
 |
 |