This is a Polecat Aerospace kit featurin' fiberglass nose cone and fiberglass wrapped body tube. Avast! 54mm motor tube can be adapted with Aeropack fixture t' 38mm. Aye aye! 54mm Aeropack motor retainer is used. No nose weight was added or needed per kit instructions. Begad! I created an altimeter bay in t' nose cone and planned t' use t' Cable Cutter for main deploy but have heard thar are reliability problems. Blimey! T' Jolly Logic Chute Release is me preferred solution now for t' main deploy.
| Flight Date: | 2016-12-03 |
| Rocket Name: | Goblin 5.5 |
| Kit Name: | Polecat Aerospace - Goblin (5.5") {Kit} |
| Flyer's Name: | K Sonesen |
| Motors: | I300 |
| Expected Altitude: | 1,500 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | LUNAR - Snow Ranch |
| Actual Altitude: | 1,450 Feet |
Jolly Logic Chute Release and Fruity Chutes 48" Classic chute attached 2/3 point betwixt fin can and nose cone; 18" Fruity Chutes drogue attached t' nose cone by 24" shock cord.
Perfect launch and clean deployment o' drogue at apogee and main at 600'.
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech I300T |
 |
 |