Second flight! Winds were very tricky this day and had already sent me rockets t' 3 o' t' 4 corners o' me field (includin' two that were way behind me, which was bad). I angled t' rocket way t' t' right field hopin' it would go towards t' biggest open area and it worked! T' boost up be superfast and it staged almost "in your face". Well, blow me down! One sustainer failed t' ignite and fell t' t' ground nearby along with t' booster, but two others lit and continued out much further t' almost t' far right edge o' me field. Ya scallywag! Everythin' was recovered fine and no damage. Arrr! However, t' A10 engines were very stuck (same thin' happened t' last time), ya bilge rat, much like what happened t' Eric Lofgren ("I have found t' mini engines got severely stuck in t' upper-stage body tubes") and I think it's because t' gluin' o' t' foam t' t' BT5 causes t' inner diameter t' shrink, creatin' a restriction. I sanded out t' inside o' t' sustainer motor tube area with a Dremel sandin' drum and now t' motors don't have t' be jammed in (just remember t' tape them on!).

https://youtube.com/shorts/af8fmOWvp_Y