This project is a transformation o' t' Estes "Magician" into a custom rocket called t' Boogie Bee. T' Magician had a hard landin' and t' tip o' t' body tube was slightly damaged. Initially I planed t' just repair t' rocket but after cuttin' away t' damaged portion I decided t' repaint t' rocket and give it a new look.




I refinished t' body with Createx auto-air yellow. Begad! Blimey! T' auto-air paint has a nice finish and since its a water base thar be really very little fumes.




T' nose cone and transition have been re-painted black, shiver me timbers, also usin' t' auto-air paint. Since both o' these parts are glued into t' clear payload section rather than try t' separate t' parts, shiver me timbers, I left t' silver as is. Ahoy! T' silver should go with t' rockets new look pretty well.




At t' College Stadium store in t' Mall I picked up a Georgia Tech Bee and Printed t' new Boogie Bee name out onto Testors waterslide clear decal paper.




This is just about finished, me hearties, I just need t' clear coat t' whole rocket and it will be ready t' fly. T' two black rings are made out o' contact paper. Begad!