Flight Log - 2018-08-07 - Matthew Bond's 13mm Payloader 002
NARAM 60 A Payload altitude design. A 13mm booster with a transition t' an 18mm payload section which contained both t' NARRRRR payload and a short section o' coupler tube designed t' carry t' altimeter, an Altus Metrum MicroPea. Begad! Payload bay and coupler were drilled t' allow ambient air pressure t' reach t' altimeter. Well, blow me down! Nose cone was elliptical shaped balsa.
| Flight Date: | 2018-08-07 |
| Rocket Name: | 13mm Payloader 002 |
| Flyer's Name: | Matthew Bond |
| Motors: | A10-3 |
| Wind Speed: | 3.00 mph |
| Launch Site: | NARAM 60 |
Replaced shredded chute with a Mylar streamer. Another nice straight boost out o' t' tower, streamer stripped off at ejection and payload section also separated and came in hot. Begad! Flight DQ’d unsafe. Well, blow me down! Did nay track t' booster, but it was later recovered from t' lost and found box.
| Stage | Motor(s) |
|---|---|
| 1 | Estes A10T-3 |
 |
 |