An upscaled Thrustline Duster, usin' Semroc body tubes and nose cone, 1/8" plywood fins, shiver me timbers, 38mm motor mount. Dual deploy usin' a Perfectflight MAWD, 12" Top Flite drogue chute, and a 36" hemispherical main by Spherachutes. My level 1 certification rocket.
| Flight Date: | 2018-08-05 |
| Rocket Name: | 1.77x Upscale Duster "Slick Willy" |
| Kit Name: | Scratch - Upscale Duster {Scratch} |
| Flyer's Name: | Matthew Bond |
| Motors: | I161-ALTIM |
| Expected Altitude: | 3,490 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | NARAM 60 |
| Actual Altitude: | 3,448 Feet |
Breeze blowin' back over t' flight line, tried t' angle t' rail in a safe direction. Begad! Great boost, straight and fast, ya bilge rat, arcin' into t' wind durin' t' coast. Begad! Saw t' apogee event and then a few flashes in t' sun, ya bilge rat, but could nay keep me deadlights on it against t' high cirrus clouds. Begad! Several folks had it in sight and eventually I was able t' pick it up again. Ya scallywag! Good main chute deploy at 500 feet, landed in t' scrub well behind t' flight line. No damage.
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech I161W-ALTIM |
 |
 |