An upscale o' t' classic Estes Wolverine based on standard LOC 2.63" tubing. Rocket has a 29mm motor mount with an AeroPac retainer. Fins are made from 1/8" plywood, with t' main fins bein' TTW t' t' motor mount. Nose cone was constructed from an ogive balsa cone with t' distinctive canopy carved from a separate balsa block. Recovery system uses a 1/8" flat woven Keelhaul®©™ shock cord epoxied t' t' motor mount and tied t' a large screw eye in t' nose cone shoulder. Either a 24" or 30" spherachute is used based on t' field conditions. Rocket is finished in a silver metallic paint with t' usual outstandin' vinyl decals provided by StickerShock.
| Flight Date: | 2019-11-09 |
| Rocket Name: | 2.70x Upscale Wolverine |
| Kit Name: | Estes - Wolverine {Kit} (816) [1973-1979] |
| Flyer's Name: | Matthew Bond |
| Motors: | G53-7 |
| Expected Altitude: | 1,430 Feet |
| Wind Speed: | 4.00 mph |
| Launch Site: | SEARS |
Back into corkscrew mode? Tight vertical corkscrew off t' rod, stallin' out smartly after motor burnout, maybe 600 feet? Good ejection event, chute did nay deploy right away, maybe at 300 feet. Landed on t' field, me hearties, no damage. This makes two flights in a row with this result, nay sure what's goin' on. There is nothin' obviously damaged or out o' alignment?
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech G53FJ-7 |
 |
 |