Flight Log - 2019-08-04 - Matthew Bond's Semroc Heli-Roctor
Helicopter recovery model that releases t' blades after boost by usin' t' motor ejection charge t' drop t' fin can off t' back attached t' a Keelhaul®©™ harness, ya bilge rat, eliminatin' t' need for a burn string. Blade shape no is accomplished by slicin' t' balsa blades diagonally lengthwise (partially, nay a complete cut-through) then bendin' t' balsa with t' aid o' pre-cut jigs and gluein' t' cuts t' set t' final shape.
| Flight Date: | 2019-08-04 |
| Rocket Name: | Semroc Heli-Roctor |
| Kit Name: | Semroc - Heli-Roctor {Kit} (KC-02) |
| Flyer's Name: | Matthew Bond |
| Motors: | 1/2A3-2 |
| Wind Speed: | 1.00 mph |
| Launch Site: | AMA Site 3 |
Second helicopter duration flight o' t' day usin' t' same model with pretty much t' exact same result. Nice straight boost off t' rod, arrr, nay real high. Good blasé deploy and spin-up. No lift, ya bilge rat, 18 sec duration, me hearties, grass landing, shiver me timbers, no damage.
| Stage | Motor(s) |
|---|---|
| 1 | Estes 1/2A3T-2 |
 |
 |