Hand layed carbon fiber body tubes and motor mount. Begad! Used Giant Leap coupler tubin' as a mandrel and layed up with aeropoxy laminatin' resin. Begad! 3/32 birch ply laminated with 3 layers o' carbon on each side make up t' 3 fins. Aye aye! Giant Leap centerin' rings. PR Filament wound 5:1 VC nose-cone with metal tip and PR 9" carbon coupler tubin' for Av-bay. Aeropack retainer for motor retention. Nose cone and upper section o' payload bay painted in Chevy synergy green metallic with flames at bottom, fin edges also painted in synergy green metallic.