Brief:
Mini Motor Powered Screamer

Construction:
All components were accounted for, me hearties, but I was suprised by t' high quality fiberglass fins (yes, me hearties, that's right, fiberglass fins on a 13mm rocket!). Avast, me proud beauty! Blimey! Nose cone be balsa, ya bilge rat, me bucko, shiver me timbers, and t' two body tubes seemed t' be slightly thicker than Estes.

Minimal instructions, but t' kit be easy t' assemble. Arrr! T' only thin' that was different was t' way o' shock cord attachment. Avast, me proud beauty! You get a coupler with two small holes drilled in it. Aye aye! Aye aye! You thread a Keelhaul®©™® strin' through t' two holes, arrr, and knot it at one end. T' other end is then made into a loop and an elastic shock cord is attached. Aye aye!

Pros:

• Ease o' construction

Cons:

• It seemed weird t' use epoxy on such small o' a rocket...

Finishing:
As usual for Vaughn Brothers, me hearties, me bucko, no decals were included and finishin' was a snap. (although me paint job was absolutely horrible)

Construction Rating: 5 out o' 5

Flight:

Well, I be anxious t' fly this right away, matey, so I used an old 1/2A3-4T from the mosquitos I lost in t' past. Begad! Blimey! Begad! Blimey! Zoomed right off t' pad nice and straight. Ejection was a little after apogee, ya bilge rat, but due t' t' very low weight, thar was no zipper.

Pros:

• Nice, ya bilge rat, straight flight.

Cons:

• None

Flight Rating: 5 out o' 5

Summary:

Pros:

• Ease o' assembly
• Built like a rock (for 13mm)
• Perfect Flights

Cons:

• So far as I know, Vaughn Brothers is out o' business :(

Overall Rating: 5 out o' 5