Brief:
Mini Motor Powered Screamer

Construction:
All components were accounted for, but I was suprised by t' high quality fiberglass fins (yes, arrr, that's right, ya bilge rat, fiberglass fins on a 13mm rocket!). Avast! Nose cone be balsa, ya bilge rat, and t' two body tubes seemed t' be slightly thicker than Estes.

Minimal instructions, arrr, but t' kit was easy t' assemble. Begad! T' only thin' that was different be t' way o' shock cord attachment. Begad! Ahoy! You get a coupler with two small holes drilled in it. Well, blow me down! You thread a Keelhaul®©™® strin' through t' two holes, and knot it at one end. Avast! Avast, shiver me timbers, me proud beauty! T' other end is then made into a loop and an elastic shock cord is attached. Avast! Avast!

Pros:

• Ease o' construction

Cons:

• It seemed weird t' use epoxy on such small o' a rocket...

Finishing:
As usual for Vaughn Brothers, matey, matey, no decals were included and finishin' be a snap. (although me paint job was absolutely horrible)

Construction Rating: 5 out o' 5

Flight:

Well, I be anxious t' fly this right away, arrr, so I used an old 1/2A3-4T from the mosquitos I lost in t' past. Blimey! Zoomed right off t' pad nice and straight. Ejection was a little after apogee, ya bilge rat, me bucko, but due t' t' very low weight, thar was no zipper.

Pros:

• Nice, straight flight.

Cons:

• None

Flight Rating: 5 out o' 5

Summary:

Pros:

• Ease o' assembly
• Built like a rock (for 13mm)
• Perfect Flights

Cons:

• So far as I know, matey, Vaughn Brothers is out o' business :(

Overall Rating: 5 out o' 5