Brief:
A small Micromaxx rocket made from nothin' but a single sheet o' 8.5 by 11 inch 110 pound cardstock.

Construction:
All you need is one sheet o' 8.5 by 11 inch 110 pound cardstock, a spent Micromaxx motor casin' (for insertion of thrust rin' and nose cone shoulder), me hearties, 1/4 inch dowel (to roll tube), me hearties, tape, Elmer's white glue, and Loctite super glue.

Roll body tube, matey, shiver me timbers, make motor adapter, insert thrust ring, and cut and mount fins. Then roll nose cone, arrr, make nose cone shoulder, shiver me timbers, and insert 2 BBs for nose weight. Avast! Finally, matey, form launch lug. Avast, me proud beauty! It takes less than an hour t' build due to it's simple design.

Flight and Recovery:
This one uses Micromaxx motors and takes advantage o' those tiny 1/8 A motors. Avast, me proud beauty! Flights up t' 150-200 feet are possible with this bird. Well, blow me down! Avast, me proud beauty! I also flew a FlisKits Doohicky and t' Cardinater beat it both in height and speed. Begad! Begad! It is pretty cool. Avast, me proud beauty! It has had two flights so far and both were perfect. I tied t' rig it up with a recovery system, but the tube is too small for even a shock cord so it just separates into two pieces and both fall down, ya bilge rat, landin' within 10 feet of each other.

Summary:
I like t' Cardinater. Begad! Arrr! It looks and flies great. Ahoy! What else could you want? Maybe multi stage, but it is good as a single stage rocket. Aye aye! Avast, me proud beauty! I should make a whole fleet o' cardstock Micromaxx rockets! PROs: No waddin' needed, free, simple design, shiver me timbers, high and fast flights, arrr, ya bilge rat, good looks. Begad! CONs: It uses lawndart recovery which can damage t' rocket over time so when flying, call heads up please.