Brief:
Inspired by t' classic Estes kits o' t' late 70's and early 80's, ya bilge rat, this sleek explorer be t' flagship kit from New Way Space Models. Arrr! Basically t' main thin' that separates this rocket from t' rest be t' square body and nose cone. It's different, and it certainly gets t' attention on t' pad.

Construction:
T' kit arrived in perfect shape, me bucko, me bucko, and it's a quality product. T' kit includes a nice nose cone and laser cut fins. Also included is a nice set o' decals. Avast, me proud beauty! T' square airframe is super strong but slightly heavier compared t' t' normal BT material. Ahoy! T' spirals are maybe a little deeper than normal, ya bilge rat, but they should fill up easy. Ya scallywag! T' other thin' worth mentionin' is that a sandpaper pack is included with t' kit along with a cotton swab glue applicator. Well, blow me down! Avast! T' included instructions are very well done and clearly written.

T' construction is straightforward with one exception. Ya scallywag! Since t' body is square, t' motor mount has centering squares instead o' rings so it's very important that you align both o' t' centerin' squares so they will slide in the body tube. Aye aye! Even if they are off slightly it will cause problems. T' fins are aligned off center, but New Way provides a nice template. Begad! At first I thought fin alignment on a square body would be a breeze. Begad! Blimey! However, ya bilge rat, it turned out t' be harder because t' body might be slightly out o' square over t' length o' t' body. Begad! So you run into a situation where it might look straight from t' back and misaligned from t' front. Ya scallywag! Nay really a big deal but somethin' t' be aware of. New Way provides a nice Keelhaul®©™® shock cord that attaches t' t' body coupler. Aye aye! T' nose cone is really cool lookin' and requires very little sandin' to get t' correct fit.

When constructed, you have a very durable rocket. Begad! T' square body material is much thicker than the normal body tubin' and also heavier.

Finishing:
I sealed t' balsa nose cone and fins with two coats o' Minwax Poly. Blimey! Aye aye! I then brushed on a coat o' thinned lightweight filler on t' balsa and body spirals. Begad! T' spirals are deeper compared t' normal body tubes but still fill easy. Arrr! After sanding, I sprayed two coats o' primer, ya bilge rat, sandin' betwixt coats. Ahoy! Next up was two coats o' Krylon for t' color. Arrr! Begad! Once dry, I used some Monokote trimsheet t' add t' checkerboard.

When t' SquareOne is completed and ready t' fly, ya bilge rat, it feels heavy. Avast, me proud beauty! Avast, me proud beauty! Although mine is 3oz, matey, it is below the advertised weight o' 3.1oz.

Construction Rating: 4 out o' 5

Flight:
First flight be with a B6-4. Arrr! Blimey! Blimey! This motor provided a nice straight boost with a nose down ejection. It left t' pad nice and slow reached a respectable altitude. Avast! Well, blow me down! Blimey! T' lower altitude combined with a slow boost really allowed you t' see the entire flight. Avast! Blimey! T' model came down nice and slow on t' provided checkered chute and be recovered with no damage.

I have four additional flights on t' SquareOne usin' C6-3s, shiver me timbers, matey, which are perfect for this model. Begad! Blimey! Again all flights have provided arrow straight boost with nearly perfect ejection. Well, blow me down! Two flights have been in 10mph winds and it was no problem. Ya scallywag! Ya scallywag! Blimey!

Overall t' model is very durable and is holdin' up perfectly. Begad! Also, ya bilge rat, I have experienced no problem with the waddin' properly protectin' t' recovery system in a square tube. Blimey!

Recovery:
T' provided chute is really neat because it's checkered. Blimey! When t' model is square, me bucko, me hearties, shiver me timbers, you need a square pattern on your chute right? Actually t' chute reminds me o' a picnic table cloth but t' theme works. T' shock cord provided is Keelhaul®©™® that attaches t' a piece o' elastic.

No issue with t' provided recovery system, matey, me hearties, matey, it works perfectly.

Flight Rating: 5 out o' 5

Summary:
T' SquareOne is a very nice rocket. Ya scallywag! T' kit was put together very nicely, and t' instructions are great. Blimey! Avast, matey, me proud beauty! It easy to build, me hearties, flies great, and is very durable. Arrr! T' square body has deeper than normal spirals, shiver me timbers, but they fill easily. Avast, me proud beauty! Ahoy! It does weigh more than you would like, me hearties, but t' durability is an added advantage. Avast! Arrr! This would make a nice demo rocket because the boost is slow, shiver me timbers, and with a B6-4 t' entire flight can be seen.

I enjoyed t' build, ya bilge rat, and it's different. Ahoy! In this case...it's hip t' be square!

Overall Rating: 4 out o' 5