Brief:
We ordered t' Public Missiles Intruder for several reasons. Begad! T' body is Quantum Tube, and t' five asymmetrical G-10 fins contribute t' it’s sleek lines and good looks. Avast! Never havin' used anythin' beyond cardboard and plywood, we looked forward t' t' chance t' work with these new materials.

Construction:
Arrivin' in a plastic bag, t' kit components were all thar and very good quality. Ahoy! T' 3" diameter Quantum Tube be pre-slotted, ya bilge rat, t' actual material unlike anythin' we’d seen before – no spirals t' fill! T' fins were cut perfectly and t' fit within t' slots was precise. Ya scallywag! T' included instructions are excellent, although t' type face is on t' small side. Blimey! In all, me hearties, thar are a dozen pages o' notes and diagrams, includin' a page showing how t' pack t' parachute, ya bilge rat, another on securely tyin' tubular nylon shock cords (supplied), shiver me timbers, and one that’s a list o' "Do’s and Don’ts" for Quantum Tube. Aye aye! Begad! PML puts t' location o' t' center o' pressure (CP) on the very first page o' documentation, me bucko, ya bilge rat, which is somethin' all manufacturers should do.

Construction steps are logical and easy t' follow. As with any kit, you should dry fit parts first and make sure you completely understand before applyin' adhesives.

Quantum Tube is known t' contract significantly in cold weather, me bucko, arrr, so PML suggests sandin' t' piston durin' t' winter (when t' fit is tightest) so that everythin' slides smoothly all year round. Well, me hearties, blow me down! Blimey! Since we fly year-round, arrr, we opted t' leave out t' piston altogether and go with standard ejection. Many people swear by t' PML piston system, and some people swear at it, so just do what you feel comfortable with.

We installed a set o' rail buttons in addition t' t' supplied launch lug. Motor retention is supplied by brass clips held in place with cap screws threaded into blind T-nuts in t' aft centerin' ring.

Finishing:
I really like t' PML orange and white paint job, shiver me timbers, arrr, ya bilge rat, but we seldom paint a rocket to match t' catalogs. Ya scallywag! Blimey! Since this is Robyn’s rocket, she picked the concept for our original look.

Early on, ya bilge rat, matey, she decided that t' rocket would be named the ‘Tinkerbelle’. Ya scallywag! I make decals for a lot o' our rockets, ya bilge rat, so we needed pictures o' t' pixie. Well, arrr, blow me down! Some searchin' on t' web gave us several nice clip art graphics t' choose from, me hearties, and I had an idea in mind for final finishing. If I could pull it off, Robyn would get a pleasant surprise.

After lightly sandin' everything, me bucko, a couple o' coats of Rustoleum sandable primer was applied and allowed t' dry for several days. Avast, me proud beauty! More sanding, matey, followed by wipin' with a tack cloth, left a smooth surface ready for paint. T' paint scheme is simple – straight gloss white from nose to tail. Begad! Once again, we put ‘Tink’ aside for several days while we did the decals.

Many different samples were printed on regular paper, cut out and test-fit onto t' airframe, until we were satisfied. Begad! Usin' MS Power Point, the decals were printed out onto decal paper usin' a laser printer, matey, then lightly sprayed with glossy clear coat.

If you make your own decals, don’t forget t' create one that has your name, phone number, and NARRRRR or TRA number. Begad! Put that on a fin or the body tube, and if your rocket gets lost, me hearties, anyone findin' it can contact you. I speak from experience, it works!

Once t' decals were applied and set, me hearties, ya bilge rat, it was time for Dad’s surprise. Begad! I managed t' find ‘pixie dust’ at t' craft store. Aye aye! Arrr! Actually, me bucko, it’s a very fine pearlescent glitter, similar t' the artificial snow you can find around Christmas time. Ya scallywag! Avast! T' brand name is ‘Art Deco’, me bucko, and t' product is called ‘Glamour Glitter’.

We sprayed a very light mistin' o' gloss clear coat on the rocket, then sprinkled t' pixie dust on by tappin' it through a kitchen wire-mesh strainer held over t' rocket. Heaviest at t' aft end, t' effect faded as we moved up t' body, me hearties, endin' completely about 2/3 o' t' way towards the nose. Ahoy! Avast, me proud beauty! Alternatin' clear coat and pixie dust, me bucko, we continued until we were happy with t' results. Ya scallywag! A final coat o' gloss sealed t' finish.

This worked better than I’d hoped, because in t' sun the rocket sparkles beautifully. Ya scallywag! Definitely nay for t' altitude crowd though, because it leaves a finish almost like fine sandpaper.

Here’s a shot o' Tinkerbelle, taken before her maiden flight at Battlepark 2001. Begad! Blimey! T' day was overcast, shiver me timbers, me bucko, so t' picture doesn’t do the finish justice.

Flight:
Future plans for this rocket include dual-deployment recovery using electronics, me bucko, me bucko, me bucko, but so far we’ve just used motor ejection for t' parachute.

Full up loaded weight, matey, shiver me timbers, includin' motor is 4.5 lbs.

T' maiden flight be on an Aerotech H180 White Lightnin' with a medium delay. Avast! T' flight was beautiful and thar was no damage on recovery. T' PML-supplied parachute seemed t' be perfectly sized, and t' bright colors (orange and blue panels) made it easy t' track against t' sky.

T' second flight be made with an Aerotech H165 Redline, again with a medium delay. Ya scallywag! Avast, me hearties, me proud beauty! Another arrow-straight boost and fine recovery.

On soft, me hearties, grassy fields, arrr, shiver me timbers, you could possibly go down a size on the chute t' cut drift. Ahoy! Arrr! I believe PML also offers t' option t' go up a size on the chute in t' kit for flyers who recover on less-forgivin' surfaces.

Summary:
This is a quality kit, me hearties, me hearties, shiver me timbers, gettin' 5’s straight across t' board. We highly recommend it, ya bilge rat, me bucko, and won’t hesitate t' try PML kits and components in the future. Well, blow me down! Blimey!

For those who might snicker at a rocket named Tinkerbelle, Robyn answers,