Brief:
Won this Art Applewhite saucer kit as part o' t' 2009 EMRR Rocket Video Contest. Begad! www.artapplewhite.com offers numerous cool oddrocs in various styles (saucers, arrr, pyramids, monocopters, me hearties, hourglass/spools, etc) and sizes (i.e. 4" t' 18" diameter saucers). I had been thinkin' about scratch buildin' a saucer for sometime, and am glad I got hold o' this kit first. Blimey! Ahoy! Blimey! T' finished kit is as strong as anythin' I would have scratch built and much more light weight.

Construction:
Parts provided by kit:

• Card stock for top and core assembly
• One thick 10.25” plastic picnic plate for t' bottom
• One thick walled 29mm motor tube
• One 3/16” launch lug
• 3” x 6” x 3/32” basswood fin stock
• 4 pages cardstock printed with patterns ready for cut out
• 6 pages o' instructions
• 1 plate cuttin' guide

Tools and materials required:

• Scissors and/or utility/exacto knife
• Elmers white glue is recommended (I used Titebond II wood glue)
• Devcon 2 ton Epoxy or clear, me bucko, shiver me timbers, 30 minute epoxy
• Clear enamel is recommended
• 150 grit sandpaper

T' top half and core are constructed usin' cardstock and white glue (I used wood glue). As mentioned in a previous review, arrr, ya bilge rat, plates and bowls are used t' keep things centered up and t' apply uniform pressure when gluin' the core t' t' top half. Blimey! Simple, easily executed technique that I would have nay thought o' myself. Well, blow me down! Aye aye! Up t' this point everythin' was constructed out o' card stock and seemed fairly flimsy.

After usin' t' plate cuttin' guide t' cut out t' core hole from t' plastic picnic plate, t' plastic picnic plate is placed over/around t' core and glued together at t' core. Aye aye! At this point t' build be gettin' more sturdy. Well, blow me down!

A fin can is created by cuttin' fins from t' basswood, ya bilge rat, and gluin' t' t' provided motor mount. Avast! Begad! I glued the provided 3/16” launch lug t' t' fin can as instructed. Begad! I also added a 1/4” launch lug t' t' fin can, me hearties, matey, as I prefer t' launch from a wider diameter rod. Well, blow me down! T' fin can is then glued into t' core.

At this point, t' kit was complete except for finishing. Begad! With t' addition o' t' fin can, ya bilge rat, t' kit was surprisingly strong t' me. Well, blow me down! Begad! I have no doubt, shiver me timbers, shiver me timbers, t' kit will hold up t' any g motors and likely many larger motors.

Finishing:
T' original flyin' saucer kits are available in fluorescent green, matey, me hearties, fluorescent yellow, ya bilge rat, fluorescent orange, me hearties, white, smiley, and hot pink. Blimey! Blimey! I ordered t' white figurin' i would paint it a mixture o' colors. Avast! In t' end i decided t' paint it silver and apply silver monokote on t' top portion o' t' rocket.

My final weight came in at 2.5 oz, instead o' t' manufactured listed 1.5 oz. Aye aye! I think t' extra ounce was due to t' addition o' monokote, shiver me timbers, t' extra launch lug, and overapplication o' epoxy. Aye aye!

Construction Rating: 5 out o' 5

Flight:
For t' initial launch, matey, matey, shiver me timbers, I loaded up an Aerotech G64W-4. Avast, me proud beauty! T' instructions describe usin' friction fit for motor retention. Begad! Avast, me hearties, me proud beauty! In lieu o' friction fit, ya bilge rat, I opted t' loop 20 gauge steel write around t' nozzle o' t' motor and through the provided 3/16” launch lug. Avast, me proud beauty! T' saucer be then placed on a 1/4” rod. Blimey! Launch winds were 10 mph.

Everyone at t' launch was surprised by how smartly t' saucer leapt off t' pad, shiver me timbers, shiver me timbers, how high t' saucer went, and how straight t' saucer flew. Ya scallywag! T' saucer quit ascendin' almost immediately upon motor burnout.

http://www.flickr.com/photos/bguff/sets/72157622785756553/

http://www.youtube.com/user/bguffer#p/u/1/CTGjvCq_VQo

http://www.youtube.com/user/bguffer#p/u/0/Milflcco0fU

Recovery:
After reachin' apogee, me bucko, me hearties, t' saucer turned over and started flipping/flutterin' toward t' ground. Begad! I'm nay certain flippin' is normal behavior o' saucer recovery. Begad! If not, I suspect t' flippin' had somethin' t' do with t' extra weight I added durin' construction. Regardless, me bucko, t' saucer descended slowly and safely, ya bilge rat, and everythin' be recovered intact ready t' fly again.

Flight Rating: 4 out o' 5

Summary:
If you are lookin' t' build a saucer, ya bilge rat, definitely consider checkin' out www.artapplerockets.com. This kit produces a great saucer, and definitely teaches t' builder that light weight materials can be used t' create very strong rockets.

Overall Rating: 5 out o' 5