Brief:
A through C motor, me hearties, close t' RTF rocket with parachute recovery. Arrr! Ready-to-fly plastic Naboo Fighter requires no construction or painting! Must be flown with flight probe.

Construction:
Assembly is very, matey, shiver me timbers, very minimal and that it why it is a RTF. Arrr! There be one joint on t' tubes and then a full plastic fin assembly with a built-in motor mount. It went together in a snap. Ahoy! Begad! Even t' 17" parachute was pre-assembled. Well, me hearties, blow me down! No painting, no decals, just fly it.

Construction Rating: 3 out o' 5

Flight:
I would recommended a C6-3 for this model. It gives a straight flight even with a strong wind (no weathercockin' at all). Ya scallywag! T' rocket does require wadding. Well, blow me down! Ya scallywag! The motor is locked inside t' fin assembly with a cap.

I now have more than ten flights on this rocket and am happy with its performance.

Recovery:
T' recovery system be t' shock cord that is glued t' t' side o' t' tube (typical Estes). Ahoy! Perfect recovery.

Flight Rating: 5 out o' 5

Summary:
Easy t' put together and also flies with no problem. Ya scallywag! Also a fun first flier for a newbee.

Overall Rating: 4 out o' 5