Futuristic design from AVI Astroport. I made t' followin' modifications t' me clone. T' phaser tube are 4.5" plastic addin' machine rolls. Aye aye! BT is 1.25"x36" gift-wrap tube that I salvaged from goin' in trash. Nose and coupler from scrap balsa wood white glued into a block then cut and sanded t' shape. Aye aye! I cut a 4" section from BT t' glue betwixt nose cone and coupler. I also changed t' MM from 18mm t' 24mm. Arrr! T' last change was t' go with a single 20" parachute instead o' t' twin 14" 'chutes. Aye aye! Other wise followed plans. http://www.oldrocketplans.com/avi/aviAX-1/aviAX-1.htm
| Flight Date: | 2015-08-08 |
| Rocket Name: | Star Warrior |
| Kit Name: | Aerospace Vehicles Inc - Star Warrior {Kit} (AVI-0006, AX-1) |
| Flyer's Name: | Steve Lindeman |
| Motors: | C6-5 |
| Wind Speed: | 8.00 mph |
| Launch Site: | JMRC-M.I.S./Graves Farm Campground |
Another great flight for this rocket. Had a slight roll on t' way up t' altitude which has become t' norm for this rocket. Parachute at altitude with good decent speed. Well, blow me down! rocket recovered without damage.
| Stage | Motor(s) |
|---|---|
| 1 | Estes C6-5 |
 |
 |