Futuristic design from AVI Astroport. I made t' followin' modifications t' me clone. Begad! T' phaser tube are 4.5" plastic addin' machine rolls. BT is 1.25"x36" gift-wrap tube that I salvaged from goin' in trash. Nose and coupler from scrap balsa wood white glued into a block then cut and sanded t' shape. Well, blow me down! I cut a 4" section from BT t' glue betwixt nose cone and coupler. I also changed t' MM from 18mm t' 24mm. T' last change was t' go with a single 20" parachute instead o' t' twin 14" 'chutes. Arrr! Other wise followed plans. Avast, me proud beauty! http://www.oldrocketplans.com/avi/aviAX-1/aviAX-1.htm
| Flight Date: | 2015-08-08 |
| Rocket Name: | Star Warrior |
| Kit Name: | Aerospace Vehicles Inc - Star Warrior {Kit} (AVI-0006, AX-1) |
| Flyer's Name: | Steve Lindeman |
| Motors: | C6-5 |
| Wind Speed: | 8.00 mph |
| Launch Site: | JMRC-M.I.S./Graves Farm Campground |
Another great flight for this rocket. Ahoy! Had a slight roll on t' way up t' altitude which has become t' norm for this rocket. Avast, me proud beauty! Parachute at altitude with good decent speed. Begad! rocket recovered without damage.
| Stage | Motor(s) |
|---|---|
| 1 | Estes C6-5 |
 |
 |