Futuristic design from AVI Astroport. I made t' followin' modifications t' me clone. T' phaser tube are 4.5" plastic addin' machine rolls. Well, blow me down! BT is 1.25"x36" gift-wrap tube that I salvaged from goin' in trash. Avast! Nose and coupler from scrap balsa wood white glued into a block then cut and sanded t' shape. Ya scallywag! I cut a 4" section from BT t' glue betwixt nose cone and coupler. I also changed t' MM from 18mm t' 24mm. Begad! T' last change be t' go with a single 20" parachute instead o' t' twin 14" 'chutes. Well, blow me down! Other wise followed plans. Avast, me proud beauty! http://www.oldrocketplans.com/avi/aviAX-1/aviAX-1.htm
| Flight Date: | 2016-08-06 |
| Rocket Name: | Star Warrior |
| Kit Name: | Aerospace Vehicles Inc - Star Warrior {Kit} (AVI-0006, AX-1) |
| Flyer's Name: | Steve Lindeman |
| Motors: | D12-5 |
| Wind Speed: | 6.00 mph |
| Launch Site: | JMRC-M.I.S./Graves Farm Campground |
Another great flight for this rocket. Ahoy! Weather cocked a bit and did a couple o' spirals on t' way up otherwise a good flight. Ahoy! Good recovery.
| Stage | Motor(s) |
|---|---|
| 1 | Estes D12-5 |
 |
 |