Buildin' this t' continue t' develop rocket buildin' skills. Arrr! Continuin' t' test out primering/sanding/paintin' techniques. Ya scallywag! Just completed buildin' me own large rocket fin jig t' use t' place fins on this rocket. Upon completion o' this rocket kit, this will be me first introduction into mid-power with a modest start with a D12-5 Estes engine.
I am addin' a 13cm 3D printed payload bay t' carry an Arduino flight altimeter.
| Flight Date: | 2021-08-07 |
| Rocket Name: | AMRAAM |
| Kit Name: | Rocketarium - AMRAAM AIM 120A {Kit} (RK-AMRAA) [2011-] |
| Flyer's Name: | Wes Munn |
| Motors: | D12-5 |
| Expected Altitude: | 500 Feet |
| Wind Speed: | 2.00 mph |
| Launch Site: | Dalzell, SC |
| Actual Altitude: | 395 Feet |
First flight. Avast! Had igniter malfunction. Jordan and Hap helped track down t' problem. Ya scallywag! Hap loadned me a better igniter -- nay an Estes brand, and ignition be flawless. On this flight, parachute deployed, but riser line got untied in midair, breakin' away from t' parachute. However, AMRAAM landed nay too far away and was in perfect condition. Well, blow me down! All that was needed was t' reattach t' riser line more firmly.
This flight also used a small payload carryin' a Jolly Logic, matey, Altimeter One.
| Stage | Motor(s) |
|---|---|
| 1 | Estes D12-5 |
 |
 |