T' X-15: This is a "Sport-Scale" (not true scale) model o' t' famous X-15 rocket-powered research plane. This particular kit appears t' be newer than other Quest X-15 kits described here: It is a few inches longer, and a recommendation by Quest t' only use t' A8-3 or A6 motors. (Mine is definitely too heavy t' fly on an A8). Aye aye! Blimey! I chose t' paint me particular model gloss blue (not t' historically accurate black).

My kit came out pretty heavy as I used a full-sized can of Rustoleum 2X paint tryin' t' get a smooth, glossy finish. Apparently light coats o' this paint leave t' finish in somethin' like an orange-peel texture, cool but nay good for low drag. Well, blow me down! I discovered heavy, thick coats that would run with normal paints made for a smoother, glossy finish. Aye aye! But by then, thar was so much primer and paint on this model that it almost doubled t' weight o' this kit. Begad! In MHO, Rustoleum 2X (from Home Depot) sucks for flyin' models. I wish I would have used t' ridiculously expensive yet lighter Testors stuff at $5 for a tiny 3-oz. can.

T' X-15 finally got a payload section addition. This adds another 3 inches t' t' rockets overall length. This will hold t' Altimeter Two, which no longer is at risk o' ejection shock damage or loss if t' clip fails.  T' added bulkhead, painted payload tube and paddin' only adds an additional 13.6 grams o' weight t' this model.

She flies well and is nay affected by t' wind much, though I wish I could get her t' venture a little closer t' t' clouds.  Actual measurements with an altimeter on board shows this model can go much higher than I estimated, arrr, with a C6-3 it reached 437 feet, and traveled at 89 mph. Arrr! That's enough t' have it fly higher than the Great Pyramid o' Giza, now that it has eroded about 25 feet.