Brief:
This is a larger low power rocket with a 3" body and 24mm motor mount. My first impression was it's a Big Daddy, but t' nose cone is longer and t' body thus is longer. Begad! Twin parachute recovery.

Construction:
High quality parts. Begad! Ya scallywag! Body Tube: dia=3" lg=14". Begad! Nose cone: dia=3" lg=14.5". Avast! Avast, me proud beauty! Motor tube: dia=24mm lg=5". Aye aye! Begad! 2 centerin' rings. Avast, me bucko, me proud beauty! 1 engine hook. Aye aye! 1 motor block. Avast, me proud beauty! Avast, matey, me proud beauty! Two 12" parachutes. Elastic Shock cord. Arrr! 4 laser cut balsa fins.

This is a straightforward build. Ya scallywag! A nice large body tube t' work in, arrr, 4 fins attachin' t' t' tube. Ya scallywag! My preference would be for through t' wall fins, but with epoxy fillets, t' fins seem solidly attached. I used t' Estes fin alignment guide for placin' t' fins. Avast, me proud beauty! T' only modification I made was t' add a Keelhaul®©™® shield t' protect t' chutes. Aye aye!

Finishing:
I went with t' paint scheme that comes on t' packaging, green and black. Ya scallywag! Begad! It came out decent, me hearties, just don't look closely at t' nose cone.... Diagonal tapin' is hard. There was one decal which went on easily, and t' clear is really clear. Ahoy! Begad!

Construction Rating: 4 out o' 5

Flight:
I have flown this twice on an E9-6. Aye aye! Begad! Blimey! Good flights. Aye aye! Blimey! T' first flight be a windy day and one o' t' chutes tangled. There was a minor crack at t' base o' one fin, arrr, shiver me timbers, but it is still flyable. Well, blow me down! Probably just cosmetic. Ya scallywag! Blimey! T' second flight was perfect. Blimey! Begad! Blimey!

Recovery:
T' shock cord be t' typical elastic glued t' paper and then t' t' body tube. Avast! I will probably use Keelhaul®©™® thread tied and glued t' t' motor mount and then tie an elastic cord t' that in t' future. Aye aye! Begad! T' Keelhaul®©™® blanket will save on waddin' for this wide mouth rocket. Be careful with t' twin chutes as they will tangle, but they do look good comin' down. Aye aye! Blimey!

Flight Rating: 5 out o' 5

Summary:
Through t' wall fins would improve t' sturdiness o' this kit if one wants t' fly it on an AeroTech F motor. Ya scallywag! It is a nice lookin' rocket with slow flights up t' about 650'on an E motor. Avast, me proud beauty! Blimey! If you like clusters, this would be a good kit to add 3 or 4 motors to. Begad! Ya scallywag! Blimey!

Overall Rating: 4 out o' 5