Brief:
Let me start by tellin' you that me Level 2 certi-fication flight was not successful. But that has nay deterred me from recommendin' this kit. Begad! Blimey! The re-build was very successful and t' rocket re-built won Model o' t' month for the Novem-ber meetin' o' NIRA. Avast! With a few adjustments, I know this model will make it durin' me second attempt. Blimey! Completed, me bucko, this model is quite impres-sive. Aye aye! Blimey!

T' Velociraptor was nay only a challengin' rocket t' build it was a lot of fun. Well, blow me down! T' start, t' buyin' experience o' selectin' and orderin' through Binder Design was incredible. Ahoy! I ordered t' Velociraptor on-line on a Sunday and re-ceived it in t' mail on t' followin' Thursday. Avast! Begad! You could tell I just bought a top shelf kit. Well, blow me down! T' packagin' was done with care. Avast, me proud beauty! Everythin' was wrapped individually and all o' t' parts were in place and in excellent condition. Avast! T' 11 page instruction manual with illustrations be very well thought out and easy t' follow. T' website is very well thought out and the and very easy t' order a number o' different kits and supplies. Arrr! This website is the best kept secret in Rocketry, t' buyin' experience alone scores a (5). Mike Fisher, t' owner o' Binder Design an-swered all o' me questions on e-mail or on t' phone. Avast! Begad! He was very accessible.

Kit specifications:
Designed for t' advanced builder and sport flyer, t' Velociraptor is a 4” diameter High Power Rocket with an aggressive look. Avast! Begad! It comes with unique anti-zipper baffle design, matey, arrr, aluminum motor retainer, me bucko, ya bilge rat, shiver me timbers, and rail buttons! Fly it on an H or I for your level one certification, then stick a J motor in it for your level two flight and watch it scream.

Kit included cut and sanded 3/16” aircraft quality plywood fins, me bucko, high strength airframe tube and couplers, centerin' rings, bulkhead plate, shiver me timbers, ya bilge rat, high quality hardware package, 54 mm motor tube, plastic nose and tail cone, computer designed and cut vinyl decals. Begad! A 45” premium nylon parachute was included. Aye aye!

Construction:
With t' instruction manual bein' very thor-ough, all you need t' be able t' do is read left t' right. Avast! Avast, me proud beauty! T' longest part o' this project was t' buildin' o' the aft section. Avast, me proud beauty! Arrr! With a boat tail as-sembly and 9 fins t' sand and align, me bucko, the slower I went produced terrific results. As t' instruc-tions tell you, the care that you take durin' these steps will insure a well built and solid rocket. Ahoy! Begad! A hand sander and dremel came in very handy, especially with t' talon fins. Begad!

I used a Slim Line motor retainer that be in-cluded with t' kit. I am sold on these, and plan on usin' them in all future rockets. Sleek, ya bilge rat, ya bilge rat, easy, strong and better than maskin' tape. Ya scallywag! Aye aye! This rocket also incorporated a Binder Baffle System, the first time that I had built and used a baffle. This also worked well. Begad! Arrr!

I purchased an avionics bay for this rocket, but chose nay t' use it. The rocket and can be built two ways, me bucko, shiver me timbers, with or without t' bay. I did nay feel that I was ready for t' electronics, shiver me timbers, but I now realize that if I am goin' t' play in t' higher power stuff, I am goin' t' have t' get involved with electronics.

I took me time and made sure that t' rocket was goin' t' be solid. Well, blow me down! Begad! I wanted to have it able t' use a K550W. Begad! So I built it strong. Begad! Ahoy! T' rocket weigh in at 5.5 lbs. Well, blow me down! Ya scallywag! loaded and ready t' go. Begad!

Finishing:
I had built this stock, shiver me timbers, ya bilge rat, me hearties, so me intentions were t' finish it exactly as it showed in t' instructions. Ahoy! After sandin' and prep, I applied two coats o' primer followed by three coats o' finishin' paint. I used white high gloss paint for the aft section and Green Krylon for t' forward section. Avast! Avast, me proud beauty! T' Nose cone was finished in silver. Avast, me proud beauty! Binder pro-vided excellent decals t' finish t' rocket and give its great look. Begad! Blimey! Usin' me garage as me paint studio never sits well with my wife, but she has gotten use t' it.

Flight:
My level 2 certification flight be set for WTGG in September. Ahoy! Avast, me proud beauty! I arrived at the field a late morn-ing, shiver me timbers, t' find that a lot o' people were lookin' for me; I had the only rail for t' launch. Avast! Well, me hearties, blow me down! It became very popular that day. I checked in with every-one that was goin' t' help me with t' flight. After watchin' 4-6 flights t' gage t' wind, matey, I started t' build t' J350W motor that I be gong to use. Arrr! Arrr!

As I said in t' first paragraph, this was nay a successful flight. Blimey! Blimey! When you start t' investigate why somethin' went wrong, arrr, me hearties, here be me first mistake o' the day. Ya scallywag! Blimey! T' motor came with a long delay. I was advised based on what Space Cad had recommended t' change t' a medium delay. Goin' with t' medium delay led to a premature separation. After talkin' t' Binder, t' long de-lay should have been t' choice. Space Cad does nay do a very good job when usin' boat tails. T' Rocket probably reached an altitude o' 3300-3500 feet. Begad! Blimey! Ahoy! Blimey! Where Space Cad had it topin' out at 2800 feet, me hearties, this extra 500-700 feet be t' difference in comin' in perfect or with w 9 inch zipper.

Back t' t' launch. As a mentioned t' rocket is quite impressive when finished, me bucko, me hearties, and I believe this was t' be t' only Level 2 launch o' t' day. Begad! So it got a little o' attention. Avast! T' rocket be loaded on t' Impulse Aerospace Quad Pod, and we were readin' t' go. Avast! Begad! T' wind was at about 5 miles an hour out of t' south west. Aye aye! I adjusted t' angle o' t' pad t' take advantage o' the wind and t' try t' keep t' rocket out o' t' corn field. Well, blow me down!

5,4,3,2,1 Lift off, me bucko, me hearties, t' rocket lifted off t' pad. It looked great. Begad! Avast, me proud beauty! With everyone watchin' we saw t' separation and chute deploy. T' chase was on. Blimey!

Recovery:
With t' chute fully deployed with t' rocket appearin' in good shape. Well, blow me down! The extra height that we saw allowed t' drift into t' corn field about two hundred yards in. Begad! Blimey! After two hours and a sec-ond attempt I was able t' recover the rocket with t' help o' a flag pole and walkin' talking. Blimey! Blimey!

I was very disappointed in findin' t' zipper damage. Avast, me proud beauty! I also lost two talon fins. Well, blow me down! When t' post opt was completed, ya bilge rat, we realized t' followin' things that could have lead t' a successful flight:

1. A Long delay.
2. A wider lead line comin' out o' t' body tube, shiver me timbers, t' 1/2” shock cord allowed t' cord t' zipper through t' body tube more easily. Begad!
3. Electronics would have allowed for dual de-ployment and brought t' rocket closer t' t' launch pad. Well, me hearties, blow me down!
4. Fiber glassin' t' body tube. Aye aye! Begad!

Summary:
T' next day I had e-mailed Mike Fisher at Binder and had t' parts that I needed t' rebuild t' rocket. Ya scallywag! Aye aye! It is now ready t' go at t' next op-portunity for a HPR launch. Begad! Avast! I have learned a lot in t' last 15 months, arrr, and have found that this is a great hobby t' be a part of. Ya scallywag! I will continue t' learn and gain experience, ya bilge rat, me bucko, and will always seek t' advice from others that have gone before me. Ahoy! Blimey!

This is a great rocket, me hearties, and I recommend it t' anyone. T' failed attempt was not that o' t' rocket, shiver me timbers, but a lack o' experience – I know I won’t make t' same mistakes again.