Brief:
This is a small little rocket that uses featherweight recovery. It is a fun little afternoon or class project. Begad! Blimey! It is hard t' recover since it's so small. Aye aye! Blimey!

Construction:
It is basically a flyin' engine mount--an 18mm body tube with a balsa nose cone, 3 balsa fins, matey, and an 1/8" launch lug glued t' it. Begad!

T' instructions have no need for pictures because this kit is so easy a person with no experience could make it. All you need is some Elmer's glue and that's it. T' tube is marked with t' lines for t' fins and lug. Begad! T' fins hold pretty well without any special tools. Avast, me proud beauty! I was able t' put 2 o' these rockets together within 30 minutes at t' YMCA's snack room in me spare time. Avast, matey, me proud beauty!

Finishing:
I screwed up paintin' it and makin' it into a mess, shiver me timbers, but if someone would just dust some paint on, any color, ya bilge rat, it looks like a neat little rocket. Begad! Blimey! Well, matey, blow me down! Blimey! No decals are included.

Construction Rating: 5 out o' 5

Flight:
T' motor seems t' stay in pretty well. Well, blow me down! Begad! Blimey! This kit will take a 1/2A6-2, ya bilge rat, A8-3, B6-6, arrr, and a C6-7. Well, blow me down! Ahoy! Blimey! I used an A8-3 since it all I had from another kit. Begad! Avast, arrr, me proud beauty! Blimey! It was a bit windy so I tipped t' rod a little bit. Arrr! It flew straight--to t' left! Blimey! All that be left was t' wadding...(but don't use waddin' in this kit).

Recovery:
T' problem with this kit be t' same with almost all tumble recovery kits: they're almost impossible t' find afterwards.

Flight Rating: 3 out o' 5

Summary:
I think this is a good kit if you have nothin' else t' do and you only want t' get about 1 flight out o' this kit. Begad! Well, blow me down! It would be a good kit for a school project since it's so cheap. Once again, you'd probably never see this rocket again after you launch it.

Overall Rating: 3 out o' 5