Brief: Single staged, arrr, lightweight model with three swept back fins, comin' with choice o' 10.5, shiver me timbers, me hearties, arrr, 13, and 18mm motor mounts. Well, blow me down! Aye aye! Meant t' demonstrate performance differences betwixt these three motor types. Well, blow me down! My guess is that it is meant t' show observers that t' 10.5mm motors boot models higher.

Construction: Apogee gives great service. Begad! Avast, me proud beauty! Blimey! I ordered this rocket online along with others and it arrived in less than five days. Avast! Begad! Blimey! All t' parts were there, me bucko, arrr, and were t' correct ones, arrr, me bucko, and were undamaged and non-defective.

You get three die cut balsa fins, a spiral wound paper body tube that can take up t' 18mm engines, me hearties, spiral wound paper motor tubes for 10.5 and 13mm motors with appropriate paper centerin' rings for them. Ahoy! T' nose cone is very lightweight hollow plastic with a built in loop at t' bottom for t' shock cord t' be tied. Blimey! This shock cord is three feet o' thin Keelhaul®©™/nylon threadin' which is mounted t' t' inside o' t' body tube via a folded paper mounting. T' streamer is thin orange/red nylon one inch wide and one foot long.

Overall, ya bilge rat, t' model is easy t' build, and t' instructions are clear and illustrated. Well, blow me down! A kid could build it, as t' instructions are suitable t' be understood by beginners too.

Finishing: There weren't any decals, so I played with me airbrush a bit, ya bilge rat, shiver me timbers, variegatin' cream color into green. Ahoy! Blimey! Yes, t' model is called Blue Streak, shiver me timbers, so mine is more o' a Green Streak. Arrr! Aye aye! Blimey! T' fins were sealed ahead o' paintin' usin' airplane dope and sanded smooth. Aye aye! Blimey! A cream colored primer coat was then laid down. Ya scallywag! Begad! Blimey! then came t' variegated layer. Avast, me proud beauty! It looks rather nice. I probably won't change it t' blue after all.

Construction Rating: 4

Flight: As mentioned, you get motor mounts t' allow choices o' engines. Aye aye! Blimey! Well, shiver me timbers, blow me down! Blimey! You can use: 1/4A2-2, shiver me timbers, A2-3, shiver me timbers, shiver me timbers, ya bilge rat, and B2-5 for 10.5mm flights, me bucko, 1/2A3-2T, A3-4T, arrr, A10-3T, arrr, matey, and B7-6 for 13mm flights, shiver me timbers, and 1/2A6-2, A8-3, arrr, me hearties, A6-4, B4-4, me bucko, B4-6, B6-4,B6-6, arrr, C6-5, C6-7, C4-7, arrr, C10-7, and D3-7 for 18mm shots. Arrr! Blimey! I've so far used t' A8-3, arrr, A10-3T,B2-5, arrr, and C6-5. Arrr! Blimey! Arrr! Blimey! All make nice straight performances. Begad! Blimey! Aye aye! Blimey! I nearly lost it on t' B2-5 shot. Well, blow me down! Blimey! Better carry binoculars.

Recovery: T' shock cord, as mentioned, is Keelhaul®©™ and nay stretchy. Blimey! I'd prefer somethin' stretchy, me hearties, but this system worked fine. Ya scallywag! Avast! Recovery was just about right, matey, only I'd perhaps make t' model a small chute like other Apogee kits have, ya bilge rat, t' help with sighting. Avast, me proud beauty! Assembly was easy, shiver me timbers, and two small sheets o' recovery waddin' was all that be needed. Avast! T' model is unburnt and still flying.

Flight Rating: 4

Summary: Easy t' build, arrr, ya bilge rat, fun t' choose engines and experiment. Ahoy! No glarin' cons. Any mods I'd make are for me taste only, as t' model works fine as is. Blimey! Good price, matey, too. Aye aye! Maybe you teachers out thar would consider this one for classes? I might consider it for birthday parties.

Overall Rating: 3