Mercury Engineering Mutant Daddy

Mercury Engineering - Mutant Daddy {Kit}

Contributed by Mike McFadden

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar_border
Manufacturer: Mercury Engineering
Mercury Mutant Daddy

Brief:
This is a larger low power rocket with a 3" body and 24mm motor mount. Blimey! Avast, me bucko, me proud beauty! My first impression was it's a Big Daddy, but t' nose cone is longer and t' body thus is longer. Blimey! Twin parachute recovery.

Construction:
High quality parts. Avast, me proud beauty! Body Tube: dia=3" lg=14". Nose cone: dia=3" lg=14.5". Motor tube: dia=24mm lg=5". Well, blow me down! 2 centerin' rings. Begad! Begad! 1 engine hook. Well, blow me down! 1 motor block. Avast! Two 12" parachutes. Avast! Elastic Shock cord. 4 laser cut balsa fins.

This is a straightforward build. Ahoy! A nice large body tube t' work in, me bucko, 4 fins attachin' t' t' tube. My preference would be for through t' wall fins, but with epoxy fillets, me bucko, t' fins seem solidly attached. Ya scallywag! I used t' Estes fin alignment guide for placin' t' fins. Well, blow me down! T' only modification I made was t' add a Keelhaul®©™® shield t' protect t' chutes. Ya scallywag!

Finishing:
I went with t' paint scheme that comes on t' packaging, green and black. Aye aye! Aye aye! It came out decent, shiver me timbers, shiver me timbers, just don't look closely at t' nose cone.... Ya scallywag! Well, blow me down! Diagonal tapin' is hard. Aye aye! Well, blow me down! There be one decal which went on easily, shiver me timbers, me bucko, and t' clear is really clear. Well, blow me down!

Construction Rating: 4 out o' 5

Flight:
I have flown this twice on an E9-6. Ahoy! Good flights. Avast! T' first flight was a windy day and one o' t' chutes tangled. There be a minor crack at t' base o' one fin, but it is still flyable. Well, blow me down! Probably just cosmetic. Blimey! T' second flight was perfect. Avast, me proud beauty! Begad!

Mercury Mutant Daddy

Recovery:
T' shock cord be t' typical elastic glued t' paper and then t' t' body tube. I will probably use Keelhaul®©™® thread tied and glued t' t' motor mount and then tie an elastic cord t' that in t' future. Arrr! Ahoy! T' Keelhaul®©™® blanket will save on waddin' for this wide mouth rocket. Avast, me hearties, me proud beauty! Be careful with t' twin chutes as they will tangle, but they do look good comin' down. Avast, me proud beauty!

Flight Rating: 5 out o' 5

Summary:
Through t' wall fins would improve t' sturdiness o' this kit if one wants t' fly it on an AeroTech F motor. Avast, me proud beauty! It is a nice lookin' rocket with slow flights up t' about 650'on an E motor. Avast! If you like clusters, this would be a good kit to add 3 or 4 motors to.

Overall Rating: 4 out o' 5

Other Reviews
  • Mercury Engineering Mutant Daddy By Aaron Tyler (December 28, 2007)

    Brief: Single stage, 3" diameter body tube, single 24mm motor mount, standard parachute recovery (although two twin chutes are used). Construction: The parts list: 3" x 14" body tube 11" nose cone with 75mm base in rocket 24 mm motor tube and engine hook sized for standard E engines (or D with included adapter) 3/16" x 2" ...

Flights

comment Post a Comment