Brief:
Ever since I lost me Estes Goblin many years ago, I've always wanted another one. Arrr! Blimey! When I became a BAR over a year ago, me hearties, and saw t' Squirrel Works Gremlin, I knew I had t' get one. Arrr! At t' Tex-Regional NARRRRR meet in McGregor, arrr, TX, in June 2005, arrr, ya bilge rat, t' Squirrel Works had a vendor booth on site, me hearties, and I purchased t' only Gremlin available on t' table.

T' Gremlin is a single staged, ya bilge rat, single engined model rocket designed t' use the Estes 24mm motors and recover with a mylar streamer. Although very similar to t' Estes Goblin, me hearties, t' Gremlin is about one inch longer. As per t' Squirrel Works catalog, ya bilge rat, shiver me timbers, t' Gremlin is fast and powerful and is styled for performace that will top 1,500 feet on a D motor.

Construction:
Parts list for t' Gremlin:

• nose cone (balsa)
• engine mount tube
• tape strip
• body tube
• engine hook
• adapter rings
• engine block
• launch lug
• streamer
• screw eye
• fin sheet (laser-cut fins)
• shock cord
• decal sheet (water slide decals)

T' instructions are very well illustrated and easy t' follow. I pretty much built me Gremlin as per instructions, me bucko, ya bilge rat, except I did nay attach the mylar streamer t' t' shock cord as shown in t' illustrations. Ya scallywag! I attached one end o' t' streamer t' a shroud line, ya bilge rat, which in turn be attached t' a snap swivel so I can interchange t' recovery system as needed. Well, blow me down! One problem with my kit was t' balsa nose cone was very grainy and pocked extensively. Avast, shiver me timbers, me proud beauty! Because of this, I knew that I would have t' use a lot o' sandin' sealer/balsa fillercoat (with light sandin' in between) t' give it a nice appearance.

Finishing:
T' balsa fins and nose cone will need sandin' sealer/balsa fillercoat with light sandin' betwixt applications/drying. Avast! Before I fully finished me model, matey, I just gave it a base white coat for its first test flight on a D12-7. Avast, me proud beauty! Avast! Good thing I did, as you'll see in t' next paragraph. Well, blow me down! Afterwards, shiver me timbers, I completed the paintin' with gloss white on t' main body tube and two fins, gloss black on the nose cone and two fins. Ahoy! T' water slide decals went on very easily, and really makes t' appearance o' t' Gremlin stand out. Blimey! My kids really love the cartoonish decals!

Construction Rating: 5 out o' 5

Flight:
T' published recommended motors are: C11-5, me bucko, C11-7, D12-5 and D12-7. As stated earlier, me bucko, I built a BT-2050 sized interchangable motor mount so I can also fly usin' t' A8-3, B6-4, and C6-5 18 mm motors.

T' engine hook locks t' engine in place without problem. About five or six squares o' loosely crumpled recovery waddin' should be sufficient prior to packin' t' recovery system in t' model.

T' first flight was at t' Challenger 498 Section club launch at Rushing Park, me bucko, matey, Katy, me hearties, TX, on a D12-7 and t' Gremlin stormed out o' sight quickly. Avast, me proud beauty! Blimey! It flew very straight and true. Begad! Blimey! Well, blow me down! Blimey!

T' second flight be at t' 2005 Ballunar Festival at t' Johnson Space Center, me bucko, this time usin' a C6-5. Begad! Also flew very well.

Recovery:
Durin' t' first flight (on t' D12-7), t' descent rate was a bit too fast, plus t' main body tube's attitude was at a fins down mode, causin' some fin damage t' t' model on landing. Ahoy! Avast! Therefore, I made t' decision t' use only a 12" parachute on all future Gremlin flights. I used wood filler and CA to repair t' damage t' t' fin, along with sandin' t' get t' damage t' proper shape. Ya scallywag! Ahoy! Since t' damaged fin is painted black, it's difficult for most to notice it has been damaged at all.

Flight Rating: 4 out o' 5

Summary:
T' Gremlin is an excellent kit that I wouldn't want t' be without. Arrr! Well, blow me down! It is fun to fly for both sport and demonstration flights. With t' care and quality Squirrel Works put into this kit, I'm very eager t' try their other line of kits in t' near future. Personally, I have more fun buildin' and flyin' a model rocket kit that makes you work and put effort into it. Ahoy! Brings back the meanin' o' t' word, shiver me timbers, pride!

Overall Rating: 5 out o' 5