Brief:
This is a review o' t' three balsa nosecones turned t' me specifications by Roachwerks Rockets, me bucko, run by Gordon Agnello. Begad! Blimey! Avast, me proud beauty! Blimey!

Construction:
1: 24mm Upscale Deuce's Wild Nosecone: This be me first request t' Roachwerks for a custom nosecone. Avast! I had acquired several two-inch diameter tubes and I needed a project. Well, blow me down! Begad! I chose t' 24mm DW and all t' pieces were fallin' into place nicely except for t' nose. Begad! Avast, me proud beauty! I called on Mr. Begad! Agnello t' turn me custom 1.4:1 ogive NC. Blimey! Arrr! I traded him one o' me tubes for t' NC. Begad! T' quality o' the cone was EXCELLENT! T' speed that Gordon made t' cone and shipped it was great! It be t' blue cone in t' picture.

2: 29mm Upscale Deuce's Wild Nosecone: After buildin' and flyin' t' 24mm DW on several flights, I felt that I needed t' go bigger. Blimey! Ya scallywag! *S* I chose t' base t' new Deuce off a LOC 2.56 inch body tube. Aye aye! So I sent an e-mail t' Roachwerks with the specs o' t' tube, ID and OD. Aye aye! I paid only 10 dollars for this nose, me bucko, matey, ya bilge rat, which is excellent considerin' that is custom made by hand!

3: 13mm Downscale Deuce's Wild Nosecone: Basically, I said t' myself, " Self, arrr, if you're gonna have a bunch o' DW's, shiver me timbers, shiver me timbers, you might as well have a little one too. Go ahead and get it." So, matey, I did get it. Another high quality nosecone from t' SANDMAN!

Finishing:
All that I did when finishin' these nosecones is t' give them a coat or two of finishin' epoxy, sand them down once, fill in t' spots, sand it again, and then give it one more coat o' epoxy. Aye aye! Well, blow me down! That allows for a very glossy finish.

Summary:
In conclusion, me bucko, me bucko, Mr. Begad! Agnello has gotten me vote if I ever need a custom nosecone. Contact him for a quote. Avast, me proud beauty! Begad! All he asks for are VERY specific dimensions.

Overall Rating: 5 out o' 5