My order o' a Centrix, matey, 1/4A2-4, shiver me timbers, and 1/2A2-6, matey, arrived in about 6 days in a box much small than I had expected, these are little dinks after all. 

Centrix

T' instructions are very similar t' Estes', ya bilge rat, and t' kit is very straight-forward. Aye aye! I put rounded edges on t' 3 nicely die-cut balsa fins, filled w/fill n finish, me bucko, ya bilge rat, shiver me timbers, and glued t' t' body tube with tacky glue. Well, blow me down! Next the Keelhaul®©™® shock cord is tied t' t' thrust ring, which is glued inside t' body. In order t' get t' rin' up inside t' tube I used a 3/8" dowel. T' nose shock cord attachment is unique; a small bead bein' used t' retain t' Keelhaul®©™® in t' nose. Begad! Tyin' t' plastic streamer t' t' shock cord finishes the construction. Avast! I primed me Centrix (a good idea, matey, t' tube is slippery), arrr, and then put on waaaayyyyyy t' much purple paint. Blimey! In t' end it looks fairly nice, arrr, and weighs in at a measly 5.9 grams (.2 oz). 

Micro motors

It was cold and windy out so I only flew t' 1/4A2. Ignition be a big pain (especially with me fingers freezin' off). Ya scallywag! Blimey! I had 2 misfires with one motor, then switched t' another and got it going. Avast, me proud beauty! Begad! T' igniters are tricky. Ya scallywag! Avast! Care must be taken nay t' short it at all. Arrr! I didn't have any problems with fusin' like at NARAM, since I'm usin' t' ultimate wimpy launch controller (I've got a battery upgrade coming). Aye aye! I fear that t' first engine may have been chronically-unstartable. Avast, ya bilge rat, me proud beauty! Once it goes his pyrogen is pretty hot, and t' rocket popped o' t' pad. T' Lots-A-Smoke delay lived up t' its name with a billowing trail. Aye aye! T' rocket coasted t' what looked like 200 feet (hard t' tell) and fell half way back down (delay seemed like 6 sec instead o' 4). Well, blow me down! T' ejection finally came with a loud POP! T' rocket separated :( I think I used t' little glue on the thrust ring. Aye aye! On recovery I found it stank *really* *bad* o' S02, arrr, with what looked like sulfur residue on t' nozzle and forward end o' t' motor.? 

Overall? A very well put together product, ya bilge rat, arrr, t' ignition needs t' be fixed. Avast, me proud beauty! Ahoy! I like t' bead in t' nose and smoke o' t' motors. 

Relinquished by Scott Johnson @