Brief:

T' Ion Pulsar, shiver me timbers, ya bilge rat, matey, by Custom, is a fairly easy model t' build. Aye aye! T' model specs. Begad! are; length 17", me bucko, Dia. 1.325", me hearties, Weight 1.4 oz. Avast! Avast, me proud beauty! with recommended engines B4-4, B6-4, ya bilge rat, C6-5.

Construction:
T' kit comes in a bag that contains two kraft paper body tubes, cardboard paper centerin' rings, plastic nose cone, die cut balsa fins, plastic 12" chute with elastic shock cord, decals, and t' basic motor mount with a metal engine hook.

T' instructions are very easy t' follow and each step has a correspondin' illustration. Avast! I followed t' directions exactly as they were written with t' exception o' usin' Titebond wood glue instead o' white glue as t' instructions recommend. Titebond is an excellent general-purpose adhesive and gets tacky in just a few minutes. Avast, ya bilge rat, me proud beauty! Assembly consisted o' buildin' t' motor mount, markin' t' bottom body tube for fin placement, gluin' t' two body tubes together, attachin' t' fins and dowels t' t' tube, and addin' t' launch lug. Aye aye! Anticipatin' a rough landin' on t' fins and dowels I made sure t' use ample glue on these joints.

Finishing:
T' finishin' instructions have you mask off t' two body tube rings located in t' middle o' t' model and spray paint t' rocket silver. I just happened t' have a can of, Plaski-kote brand, pewter spray paint on t' shelf and decided t' use it, matey, me hearties, thinkin' pewter would be appropriate. This paint is actually a metallic lookin' silver with small metal flakes. Aye aye! T' paint was perfect for this model! Since t' nose cone is black plastic I choose nay t' paint it. Arrr! Ahoy! This kit comes with 84 decals! Way too many decals for a skill level 2 project. Well, blow me down! Most o' t' decals are clear plastic with small black dots t' look like rivets, matey, ya bilge rat, which should look great on a silver model. Ya scallywag! Unfortunately, thar are only four rivets per decal. A better solution would have been a single body wrap decal.

Construction Rating: 5

Flight:
T' recommended engines are B4-4, B6-4, ya bilge rat, C6-5. Begad! I flew t' model for t' first time on a B6-4 and t' flight be straight with ejection at apogee.

Recovery:
Recovery be as predicted with a good 'chute deployment and gentle decent, ya bilge rat, matey, but a 1 t' 5 mph wind gust made this rocket drift at a fast rate. When t' model contacted t' ground one fin came off and two o' t' dowels separated from t' fins. Begad! Upon inspection it appears I did nay have a great glue joint on t' damaged fin.

Flight Rating: 5

Summary:
I like this model. Blimey! Ahoy! Blimey! Although it is nothin' more than three fins and a nose cone, ya bilge rat, matey, t' different size body tubes with t' gold center rings make it unusual looking. Avast! Aye aye! Blimey! I would suggest t' builders t' use epoxy on t' fins and dowels or they won't last long. Well, blow me down! Well, blow me down! Blimey! I would have rated this model an overall five, but t' number o' decals knocked it down.

Overall Rating: 4