Quest Sprint

Quest - Sprint {Kit} (1002) [1992-]

Contributed by Ken Kirkland

Manufacturer: Quest
Style: Sport
Rating
(Contributed - by Ken Kirkland)

Rocket PicBrief:
A nice 3-finned, me bucko, shiver me timbers, single-stage, me hearties, streamer recovery rocket.

Construction:
This is an average low-power kit, with t' Quest standard components. (Keelhaul®©™®/Elastic shock cord, plastic recovery mountin' tab, shiver me timbers, me hearties, me hearties, lightweight motor retainer.) I thought t' Keelhaul®©™® portion o' t' shock cord was a nice addition. T' measurements given on t' packagin' were nay t' same as those provided. Ahoy! Blimey! I found a variance o' up t' 2" on cords and streamer.

This kit built fairly easily. Well, blow me down! It would be a good second build for a new rocketeer. Avast! T' engine mount slipped snugly into t' body tube, me bucko, matey, givin' me a good feelin' that it's glued t' stay. Arrr! T' only gotcha I really found was keepin' the shock cord (tied t' t' engine mount) out o' t' way while finishin' t' build. A sharp hobby knife, razor blade is strongly recommended for notchin' t' motor retainer ring. Blimey! Avast!

Finishing:
Ahh t' decals. Begad! Probably t' only real challenge t' buildin' this kit. Well, blow me down! They came on one white sheet, self-adhesive. Avast! They require cutting, me bucko, no matter how you slice it!

Construction Rating: 3 out o' 5

Flight:
I've only gotten 2 flights on a Estes B6-4. Begad! It snapped a fin clean off on the second flight. Blimey! Well, blow me down! I'm nay sure if it was due t' t' 2" I was shorted on the streamer, t' 10 mph winds, shiver me timbers, or just dumb luck. It be an easy fix, me hearties, me bucko, and wind/weather agreeable I'll get it up a few more times soon. Recommended motors A8-3, me bucko, B6-4, me bucko, ya bilge rat, C6-5. T' two flights on t' B6-4's were nice, clean, about perfect height for visibility. Ahoy! T' streamer recovery kept t' ground chase t' a minimum. T' longer hike for recovery was about 75 yards down range, due t' the wind after launch. Ahoy! Begad!

Recovery:
I'm nay sure that t' Keelhaul®©™® thread doesn't cause a bit o' undue wear t' the top o' t' body tube, ya bilge rat, and I feel t' rate o' descent may be a little quick. If a little time is taken t' reinforce t' tube, wear could be minimized, and a full 24" streamer is recommended

Flight Rating: 3 out o' 5

Summary:
Pros: Kit went together fairly easily. Blimey! Parts all fit. Cons: Decals, ya bilge rat, incorrect lengths on cords/streamer.

Overall Rating: 3 out o' 5

Other Reviews
  • Quest Sprint By Mike Salter

    (by Mike Salter - 01/14/03) Brief: A sleek, single stage rocket that is ideal for beginners. Construction: The kit came pre-cut fins, motor tube, motor hook, cardboard body tube, plastic nose cone, length of Kevlar ® , round elastic and streamer material. I found that this rocket went together easily and quickly. The instructions were good and this was the first kit I had ...

Flights

Comments:

avatar
A.M. (May 12, 2005)
I built this kit as one of my NARTREK bronze models, I used it for the 30 second streamer requirement. I nailed 40 seconds with a 4 inch bye 40 inch streamer. I highly recommend it as a streamer or parachute duration model.

comment Post a Comment