Brief:
This is a 1/3 scale model o' Air Force AIM-9P-3 Sidewinder Air-to-Air missile that uses D or E engines. Avast, me proud beauty! T' AIM-P differed from t' current AIM-9L/M in that t' P had a longer, more tapered nose and "double-delta" canards. Ahoy! Begad! Also, t' warhead was directly behind t' guidance unit, followed by t' target detector and rocket motor. T' AIM-9L/M have t' warhead and target detector in t' opposite order. Arrr! Also, arrr, t' aft end o' t' wings were flush with aft end o' t' rocket motor. Begad! T' AIM 9P was painted gloss white overall, and did nay have a bare aluminum rin' at t' base o' t' seeker window. Aye aye! T' wings were one-piece aluminum, arrr, unlike t' composite wings on t' 9L/M.

Construction:
I used 2 BT-60 tubes and 1 BT-60 coupler. Ahoy! Well, shiver me timbers, blow me down! Blimey! All wings, fins, matey, and hangers are constructed from basswood. Ahoy! T' rolleron frames on t' wings are posterboard with paper overlay. Rollerons are .03 mil aluminum tape over t' basswood wing, me bucko, me hearties, me hearties, with t' rolleron wheels made with aluminum tape over posterboard. Avast! Blimey! T' slightly larger diameter aft end o' t' rocket motor was created with 2 layers o' plain copy paper and white glue. Aye aye! T' nose cone is from an Estes Python kit. Begad! All markings were created as TIF files and printed on clear labels with an inkjet printer.

I have copies o' old Air Force manuals showin' t' dimensions and markings o' t' AIM-9P, shiver me timbers, matey, so assembly was fairly easy once I figured out what I wanted t' do.

• Markin' - Decals
• Hanger Templates
• Forward Fin and Rolleron Templates
• Rear Fin Template
• Main Body Diagram

Construction was pretty basic, me hearties, startin' with a standard engine mount includin' a Keelhaul®©™ shock cord assembly, and t' two BT-60 tubes coupled together. At this point, me hearties, I gave t' body a light coat o' spray Kilz filler/primer and let it dry. Ahoy! Then I sanded it down, shiver me timbers, shiver me timbers, and repeated this until t' spiral lines were all filled. Blimey! Two sheets o' copy paper were glued together with white glue and wrapped around t' aft end o' t' tube and then trimmed t' meet. Well, blow me down! That joint served as a base for t' fin and win' alignment. Blimey! Wings, win' ribs, and fins were cut from 1/8" basswood usin' a Dremel tool. Aye aye! Well, matey, blow me down! These were then filled and sanded with Kilz. Avast! Hanger parts were cut from 3/16" basswood then filled and sanded.

At this point, t' body, shiver me timbers, me bucko, nose, me hearties, fins, and win' ribs were painted gloss white. Avast, me proud beauty! T' wings were painted gloss white except for a 1/2" strip along t' root edge, ya bilge rat, which be painted aluminum t' simulate bare metal plus t' rollerons. Begad! Aye aye! T' wings were attached one at t' time and each be allowed t' cure overnight. Arrr! Arrr! T' win' ribs were then attached t' each side o' t' win' roots. Avast, me proud beauty! Aye aye! T' fins were attached, again each was allowed t' cure overnight. Well, blow me down! T' hanger bases were cut from 3/16" basswood and sanded t' match t' contour o' t' body tube. Well, me bucko, blow me down! T' hanger sides and top rails were glued on. Avast, me proud beauty! T' completed rocket be painted with Testors Glosscoat and allowed t' dry overnight. Well, blow me down! T' markings and stripes were applied, along with t' aluminum tape on t' top surfaces o' t' hanger rails. Blimey! Ahoy! Then another coat o' Glosscoat applied.

Nose Weight: Check your balance! You may need t' add 1-2 oz o' nose weight. Ya scallywag! Ahoy! Michael indicates that t' CG is 24.5" from t' nose cone.

Flight:
First flight was with a D12-3 and flew with no problems. Ya scallywag! Ahoy! Subsequent flight were made with D12-5s. Avast, me proud beauty! Florida has a lot o' trees and open water. T' less canopy time, arrr, t' shorter t' drift.

Recovery:
Standard chute recovery, ya bilge rat, shiver me timbers, usin' a 2ft Keelhaul®©™ cord attached with a swivel t' a 5ft elastic cord. Avast! All landings so far have been soft, no damage yet.

Summary:
I like t' build scale models o' missile systems I've worked on. Begad! Ya scallywag! Blimey! T' PROs are mostly t' satisfaction I get when it turns out right. Well, arrr, blow me down! Blimey! T' CONs are tryin' t' locate t' correct markings and dimensions for projects like this.