Brief:
This is me box o' parts entry. Single stage rocket with small cargo bay and parachute recovery. Begad! (Parts were sent to me, matey, all but DVD and medicine bottle, which were "bonus parts.)"

Construction:
Because I be workin' with miscellaneous pieces, matey, I used 2 BT30s and a medicine bottle as a payload section. Ya scallywag! Blimey! Bottom was cut off and turned around t' become top t' accept nose cone. Ya scallywag! Arrr! 4 tube fins, mounted on struts. Aye aye! Balsa and cardboard design with a transducer type engine mount, me hearties, BT-20 motor mount, me bucko, shiver me timbers, 18 "elastic shock cord," attached t' a screw eye in payload section. Ya scallywag! Unique feature be t' "DVD" center mounted wing.

I'm goin' t' rate this build a 3.5. Avast, me proud beauty! Avast, ya bilge rat, me proud beauty! Cuttin' out t' sections on t' struts, t' make it look like struts was a little tricky. Blimey! T' mountin' o' t' tube fins t' t' struts and t' fin/strut assembly t' t' main body was a little tricky, too. Aye aye! Begad! I do recommend a separation o' t' main rocket and fin assembly for ease o' assembly. Avast! I also used a hard coat Modge Podge t' protect decals and finish.

Finishing:
Made a boat tail t' house motor. Cut struts from balsa t' hold tube fins.

Flight:
I'm goin' t' try a Quest A6-4 for first motor.

Flight 1: A6-4 way underpowered. Blimey! Blimey! Barely got off ground and broke a strut.

Flight 2: After repairin' fin strut, I went with a B6-4. Started out nice then got all kinds o' unstable. Ya scallywag! Well, blow me down! Crashed and broke 3 fin assemblies.

I will have t' take apart nose t' add some weight, me bucko, me hearties, repair fin struts, ya bilge rat, and check for stability with a swin' test before next flight.

Recovery:
Shock cord was quite heavy, arrr, 3/8", arrr, and attached t' inside o' rocket body. Begad! Assembly was straightforward, just a little tedious t' attach t' struts t' fin tubes.

Summary:
PROs: Nice little rocket and a bit o' challenge t' build so nay your typical build. Skill level 2-3. Arrr! CONs: Because of the extra joints with t' tube fins and struts, ya bilge rat, care needs t' be taken and heavy fillets added.