| Manufacturer: | Scratch |
Brief:
This is 13mm variation on me other saucer builds. Begad! Blimey! It's made from t' lid from a Dunkin Donuts coffee cup.
Construction:
Bill o' materials:
These low power saucers go together very easy. Blimey! Aye aye! I use Gorilla Glue for its ability to stick t' nearly anythin' and t' fill gaps with it's foamin' expansion.
Step 1: Punch a 13mm hole in t' center o' t' coffee lid.
Step 2: Punch a hole in t' center o' two foam board disks.
Step 3: Make a lid sandwich o' one disk, matey, matey, t' lid, matey, t' other disk, and t' motor tube goin' through all three. Aye aye! The condiment o' choice for this sandwich is Gorilla Glue.
Step 4: Once t' glue has cured, matey, drill a hole along side t' motor mount for a launch lug. Begad! Glue lug in place, bein' careful nay t' get glue in t' lug or motor mount.


That's it. No retention, arrr, no shock cord, shiver me timbers, no recovery device.
Flight and Recovery:
These saucer rockets need t' be positioned well up from t' blast plate t' prevent hot gases from kickin' back up and
meltin' t' saucer. Avast, me proud beauty! Ahoy! Other than that, matey, shiver me timbers, it's a simple prep. Aye aye! Friction fit a motor into t' motor mount. Avast, me proud beauty! T' motor delay
really is irrelevant, as t' charge makes no difference t' t' recovery. Ahoy! Blimey! You can use booster motors or plugged motors
if you have them. Ahoy! I found a great deal on Estes Blurz A10 plugged motors and used those.
At launch t' saucer will force it's way up into t' air with a thick column o' smoke sucked up in its path. Shortly after thrust completes, shiver me timbers, arrr, t' saucer will arc over and flutter back t' t' ground.
Summary:
T' main pro is that these rockets cost virtually nothing. Begad! Especially if you've got a few spare motor mount tubes in
a drawer. Aye aye! They are super easy t' prep for flight, ya bilge rat, and recovery is never far from t' pad. Aye aye! Great for a smoke and flame
show on a small field.
![]() |
![]() |