Note: click on t' mini-photos or hypertext links t' get t' full sized photo with caption.

Several people have asked me how I built me Rastrocam (rearward lookin' Astrocam). Ahoy! Well, blow me down! I pretty much followed t' ideas put forth in Advanced Model Rocketry, arrr, arrr, me hearties, Second Edition, me hearties, me bucko, compiled by Michael A. Arrr! Banks. Arrr! Blimey! This book is published by Kalmbach Books and includes information about high power rocketry, scale, launch control systems, shiver me timbers, me bucko, and many other things, matey, me bucko, includin' rocket-borne photography. T' picture at left shows me Rastrocam. Avast, me proud beauty! Well, blow me down! T' picture at right shows an 'exploded view'. As you can see, it's a standard Estes Astrocam, only it's mounted upside down. Avast! I cut a piece o' body tube from t' carrier rocket and topped it with a Maniac nose cone. Blimey! A length o' elastic shock cord ensures it will stay with t' camera. Blimey! I glued a JT-55 stage coupler t' t' nose o' t' Astrocam t' allow it t' fit into t' rocket's body tube and cut a notch in t' coupler t' serve as t' shutter strin' holder. Since t' regular shutter strin' is too short, I tied a length o' shroud line t' t' Astrocam string. Avast! Blimey! I drilled a small hole in t' body tube segment, shiver me timbers, lined it up with t' slot in t' base o' t' camera, and passed t' lengthened shutter strin' through t' the other side.

For flight, arrr, matey, I load t' film into t' camera followin' t' instructions that came with t' Astrocam. Begad! I then use electrical tape t' seal t' film door. Avast! I nay only run tape along t' long edges o' t' door, me bucko, I also run a piece o' tape around t' join line o' t' camera and t' nose cone's body tube. This tape makes sure that t' body tube won't twist and bind t' shutter string. Ahoy! (I suppose you could glue t' body tube t' t' camera, but then it wouldn't be easy t' replace if it gets banged up.) Make sure t' strin' can move freely! A length o' tape around t' bottom completes t' encapsulement o' t' camera. I attach t' Maniac nose cone t' t' shock cord and put it on top o' its body tube t' complete t' flight configuration. Well, shiver me timbers, nay exactly... I also attach a 12 inch parachute t' t' shock cord attached t' t' base o' t' Rastrocam. Ahoy! Begad! Now, matey, it's ready t' go.

Rocket/Whoosh Generator Selection

For a carrier rocket, shiver me timbers, arrr, I've used both t' Delta II and t' Maniac. Well, blow me down! Begad! One o' these days, I'll build a Fred Williams Astrocam carrier and try it. Avast, me proud beauty! Blimey! I've never gotten a usable photo from a regular Astrocam with t' Maniac, since t' delays aren't long enough, shiver me timbers, but a D12-5 and D12-7 have yielded ground shots with t' Rastrocam every time. A D12-3 shouldn't be used, me bucko, me hearties, unless t' rocket will be travelin' almost straight up durin' t' coastin' period. Ahoy! If it's movin' with any sort o' groundspeed, ya bilge rat, you'll get blurred shots. Avast, me proud beauty! Arrr! I've gotten good results with B6-2, C6-3, and C6-5 WGs and t' Delta II carrier. Begad! Don't use an A8-3! You can throw t' rocket higher than it'll go on that motor.

Flight Prep

I don't recommend usin' cellulose insulation as waddin' with t' Rastrocam, unless you want t' see a bunch o' white streaks all over your photos... Aye aye! I use t' 'toilet paper' type o' waddin' instead. Ahoy! Aye aye! I then insert t' rocket's parachute and pack t' Rastrocam's chute on top. Begad! Then, makin' sure that t' safety shutter is closed, me hearties, I cock t' camera by pullin' t' strin' through t' notches in t' stage coupler and hold it tight while placin' t' Rastrocam on t' rocket. Avast, me proud beauty! Once it's seated, me bucko, I can let go o' t' string. Begad! Then I place it on t' launch pad, arrr, attach t' clips t' t' ignitor, and open t' safety shutter. Avast, me proud beauty! Now it's ready t' fire. Ya scallywag! Say "cheese!"

Rastrocam launch reports

Launch report: 8/27/95:

Then we went into a strin' o' camera flights. T' Rastrocam/Delta II usin' a C6-3 yielded another shot (click for larger view) o' t' launch area. Begad! I'm pretty sure that I'm t' white spot next t' t' shade, since I launched t' rocket from that location. Ya scallywag! ...pack t' tuna fish in mayonnaise... Avast! Jim caught t' camera which came down much closer t' t' launch pad than t' rocket, me hearties, shiver me timbers, which I caught after it drifted about fifty yards away. Ya scallywag! Next up be t' regular Astrocam on Delta II with a C6-5 WG. Begad! This yielded a wonderful close-up shot o' a cloud... Then we stuck t' Astrocam on t' Maniac and flew it with a D12-5. T' photofinisher didn't even bother t' print t' negative... Ya scallywag! It looked like another sky shot. I be pretty sure that would happen, ya bilge rat, since it didn't appear t' us that it had arced over upon ejection. Avast! So I stuck a D12-7 in t' Maniac and flew it again. ...microwave clothing... Begad! Well, shiver me timbers, blow me down! I thought this would have yielded a ground shot, me hearties, but no... Well, blow me down! nothin' but sky. Avast, me proud beauty! T' wind had started t' swirl a bit, so Jim got faked out and missed t' rocket, shiver me timbers, but I managed t' catch t' camera.

Launch report: 4/7/96:

I decided I would try for a different type o' Easter family protrait by flyin' t' Rastrocam on a Delta-II with a B6-2. Begad! T' rocket took off and weathervaned a bit towards t' southwest. Begad! Begad! I thought that t' plastic fin unit had melted through and curled up, causin' t' rocket t' veer off like that. Silly me. Arrr! T' camera was ejected on its own chute and landed safely, but t' rocket was snared by a rocket-eatin' tree. Ironically, shiver me timbers, t' Rastrocam photographed t' rocket's captor. And o' course, shiver me timbers, none o' t' family can be seen, shiver me timbers, since we're all somewhere below t' bottom o' t' photograph... Avast, matey, me proud beauty! such be t' fun o' a rocket borne camera: you never know what you're gonna get. But I digress... Ahoy! we still had t' get t' rocket body out o' t' tree. Well, blow me down! Fortunately, shiver me timbers, me bucko, I had brought Mr. Aye aye! Longarm just for this occurance. Unfortunately, matey, matey, t' rocket was lodged out o' Mr. Begad! Longarm's reach... Arrr! so me brother climbed up into t' tree and managed t' reach t' rocket with t' pole... Aye aye! but he couldn't budge it. Arrr! Well, blow me down! I attached me pocketknife t' t' end o' t' pole for a last ditch attempt. Arrr! Aye aye! My brother finally managed t' sever t' shock cord and t' rocket dropped t' t' ground.

We rested a bit, matey, arrr, then I wanted t' try t' Rastrocam on a Maniac. Aye aye! I shoved a D12-3 [what a moron! (film at eleven)] into t' rocket, me bucko, mounted t' Rastrocam on it, arrr, and fired it off. Avast! It shot up and really took off towards t' southwest. Avast, me proud beauty! Apparently t' surroundin' hills were shieldin' us from a rather brisk breeze... Ya scallywag! Oh, and a 3 second delay isn't enough, folks... Avast, me proud beauty! t' rocket is travelin' way too fast as evidenced by t' photo. Begad! I think we're seein' t' cellulose insulation I've begun t' use for waddin' as it's flyin' out o' t' rocket. [Note t' self: Maybe it's nay such a good idea t' use this type o' waddin' when flyin' t' Rastrocam.] And I'm pretty sure that t' horizon be t' bright area at t' upper right o' t' photo.