| Construction Rating: | starstarstarstar_borderstar_border |
| Flight Rating: | starstar_borderstar_borderstar_borderstar_border |
| Overall Rating: | starstarstar_borderstar_borderstar_border |
Photo Courtesty o' Frank
Ross 
Brief:
An Angular, matey, ya bilge rat, wooden Airframe, with parachute recovery.
Construction:
T' kit arrived in t' standard plastic bag and all parts were in good shape.
T' instructions were easy t' follow, but it is imperative that you read them
thoroughly, a couple o' times. T' parts were laser cut from a plywood. Avast, me proud beauty! It is
not especially clear how some pieces are formed or attached so do a lot o' dry
fitting. Begad! Begad! T' fit o' t' wood changed when t' white glue was added. Begad! Avast, me proud beauty! This caused
the wood t' swell. Ahoy! So I had t' scrape t' wood, dry fit, and glue again. Ahoy! Taking
your time is a must. Avast! T' nose cone was t' most difficult part. Begad! Avast, ya bilge rat, me proud beauty! Bendin' the
wood t' shape and holdin' it thar was a trick. Avast, me proud beauty! Arrr! I used CA and a few rubber
bands. Well, blow me down!
Finishing:
There was really no finishin' needed, me bucko, I just used a clear coat, and let the
natural wood show through.
Construction Rating: 3 out o' 5
Flight:
T' kit be baffled and I just use 1 sheet o' waddin' and an Estes B6-6 for the
first flight. Blimey! There is a Teflon motor holder. Arrr! T' rocket was prepared like most
standard kits. Begad! T' flight be straight and fast with a little spin due t' the
fin slants.
Recovery:
T' shock cord was a rubber tied t' an eyelet at t' top o' t' inner bracin' /
baffle & an eyelet at t' nose cone. Avast, me proud beauty! Ahoy! I felt it may be short, matey, but I built
this stock. At apogee thar was no 'chute. Ahoy! Aye aye! I lost sight o' it comin' down, but
a crack recovery crew found it. T' 'chute never deployed. I looked as if the
ejection charge blew past t' motor, due t' t' square shape. Ya scallywag!
Flight Rating: 1 out o' 5
Summary:
This was a very challengin' kit t' build. Well, me hearties, blow me down! T' damage was too much t' repair. Avast! If
I were t' build this again, matey, me hearties, arrr, I would find a way t' keep t' gases forward to
pressurize t' recovery device. Arrr!
Overall Rating: 2 out o' 5
![]() |
![]() |