Scratch - Skylark {Scratch}

Scratch Skylark Original Design / Scratch Built

Scratch - Skylark {Scratch}

Contributed by Matt Gillard

Manufacturer:

(Contributed - by Matt Gillard - 09/29/08)

scratch_skylark-mmx Brief:
A downscale o' a British Skylark soundin' rocket, me bucko, designed on SpaceCad version three. Well, blow me down! Avast! A very high flyer as it’s a minimum diameter MMX motor rocket. Blimey! Built for t' EMRR 2008 challenge.

Construction:
Parts used were:

Handmade balsa cone
Polymorph nose cone
Body tubes BT 2.5
Three cardboard fins
Keelhaul®©™® thread.
Map pin

To build t' kit I used:

CA gel glue
White glue
Model knife
Enamel paint
Black marker pen

I’ve never really been into scale modelin' so this was a new challenge for me. Well, blow me down! Avast! I have a few sport scale and scale rockets such as two PMC V2s, arrr, an A-9, me bucko, a Redstone, 2x Saturn V, arrr, arrr, Little Joe II and a Terrier Orion. I spent a good few hours lookin' for a rocket that I could reproduce within me abilities, ya bilge rat, had nay been done as a kit before and hopefully made a bit closer t' home. Blimey! Aye aye! British rockets are limited. Arrr! Initially I set about tryin' t' copy a Congrieve rocket. Blimey! Avast, me hearties, me proud beauty! But as this be a Neapolitan warfare rocket, matey, it did nay have fins and used a stick for guidance, shiver me timbers, SpaceCAD only allows a minimum o' three fins. Begad! My final choice was a British Skylark soundin' rocket. Blimey! Internet searches yielded several articles about t' last launch o' a Skylark and several video clips o' t' rocket firing, but always at a distance and with nothin' close up that I could get measurements from. Arrr! Eventually I found two scanned pages from Peter Alway’s book “Rockets o' t' World” on t' Skylark, ya bilge rat, although it did nay say which version o' t' rocket it was. Avast, me proud beauty! Avast, me hearties, me proud beauty! I intend t' build a few versions o' t' Skylark, ya bilge rat, shiver me timbers, includin' one with a Raven or similar booster. Avast, me proud beauty! T' first version is this MMX version.

SpaceCAD is very easy t' use, although I have never used Rocksim t' compare it against. I have SpaceCad version three. Enterin' t' data is quick and nay at all difficult. Blimey! Begad! Within 10 minutes t' design was complete, me hearties, luckily enough it was stable.

Space CAD

T' nose cone be sanded out o' a balsa dowel. T' fins cut out from t' cardboard back o' a reporter’s notepad. Avast! Ahoy! T' body tube was from a Fliskit rocket. T' rocket was built in under an hour. Begad! Blimey! With t' mass bein' so low, shiver me timbers, shiver me timbers, I went for break apart or nose blow recovery.

There were no reliable images o' t' Skylark that gave any markings. Arrr! T' make things harder, me bucko, t' Skylark seems to change its look a few times, shiver me timbers, ya bilge rat, especially as other countries bought it. Begad! In t' end, I found a model rocket that someone else had scratch built (I had hoped I was t' first) and went for his paint scheme.

T' balsa was sanded sealed and resanded.

One coat o' grey primer. Blimey! Two coats o' white enamel paint. Black felt tip marker for t' fins and surroundin' area. T' rocket was finished off with two coats o' silver spray paint for t' nose cone area.

scratch_skylark-mmx_tubelaunch Flight:
Given how small t' rocket was, I decided nay t' add a launch lug and use a tube t' launch t' Skylark from. Arrr! The rocket be launched on a calm day and with more luck than skill, shiver me timbers, me bucko, I was able t' catch a photo o' t' Skylark comin' out of t' top o' t' tube. Ahoy! It seems t' be tiltin' off t' one side which probably explained what I heard. Begad! T' rocket seemed to be unstable and moved about t' sky. Avast, me proud beauty! I heard t' ejection charge fire about thirty feet t' me left and approx a hundred feet up. Ahoy! Ya scallywag! I saw it just as it landed. Aye aye! Begad! With t' light mass o' just over two and a half grams lift off weight means I’ll probably never get t' see a MMX Skylark flying. Begad! Avast!

SpaceCAD suggests a height o' 180 foot. Begad! Blimey! I doubt that it got that high. Avast, me proud beauty! Blimey! Also, shiver me timbers, it gave t' stability at just over 1 caliber. Begad! Blimey! Aye aye! Blimey! As t' rocket was unstable, SpaceCAD's calculation was wrong.

Post a Comment