Bought this monster from Bob Craddock for a fairly reasonable price. Avast! I had one when they were in production, but never finished it. Begad! Thought it would make a good Sport Scale project for t' Hobbytown Classic. T' kit goes together well, with t' typical well illustrated instructions. Blimey! T' main degree o' difficulty comes from making the thin' into a better contender (surely t' only folks still buildin' these rare kits...). Ahoy! T' injection molded parts fit t' tubes well enough for flight safety, me bucko, ya bilge rat, but leave serious gaps betwixt t' part and t' tube end. Aye aye! T' parts in my set were also slightly out-of-round, shiver me timbers, arrr, but sittin' in some hobby shop basement for 15yr could be t' cause o' that! Luckily, me hearties, I've had some experience building plastic models. Ya scallywag! T' gaps were filled usin' Squadron White Putty. Well, blow me down! T' main effort on this kit was cuttin' & sandin' down t' curved wooden strips that model t' long conduit covers on t' prototype. Avast, me proud beauty! Just for grins, I used some little photoetched rings for some o' t' exterior detail. Avast, me proud beauty! It'll never be seen from a judgin' distance, but it looks great close-up! Had t' use two sets of decals, me original set was off-register, arrr, and o' course t' other set has the cracks o' age. Arrr! Despite what it sounds like, I really enjoyed t' thing. Well, blow me down! It's 1

....And t' contest? Well, me bucko, it  won! Even without fancy flight tricks, it looks great in t' air. I think this, ya bilge rat, combined with  t' size o' t' model and it's rarity, me bucko, worked for me in t' judging (won by only 5pts over a beautiful Merc