Brief:
This rocket combines t' Fliskits 3 Micromaxx motor cluster and t' Semroc Triton rocket. Begad! Blimey! T' cluster component fits t' BT-20 body tube o' t' Triton perfectly. Ahoy! Blimey! T' Triton was built so that it could recover with t' use o' a streamer.

Construction:
In order t' build this rocket, arrr, you need t' FlisKits EMK3-6-30 Engine Mount Kit and a Semroc Triton kit.

T' Fliskits cluster mount comes with:

• 3 T2+ body tubes cut t' size
• 3 motor blocks
• 2 centerin' rings
• Keelhaul®©™

T' Semroc Triton comes with:

• Balsa nose cone
• BT-20 body tube
• Launch lug
• 4 laser cut fins

T' only other addition I added t' t' rocket was a screw eye, shock cord and mylar streamer material. Avast, me proud beauty! T' original Triton is tumble recovery since t' nose cone is glued in place. Arrr! My version has t' nose cone blow off like your typical 3FNC rocket.

I first began with buildin' t' motor cluster. As with all FlisKits products, shiver me timbers, t' quality o' parts was superb and t' instructions were exceptional. Well, blow me down! Blimey! I removed t' laser cut centerin' rings and t' thrust rings from t' card stock. Begad! Blimey! I then glued t' three body tubes together as indicated. I added t' tiny thrust rings, shiver me timbers, which are great quality by t' way! Blimey! This is just like buildin' a regular motor mount, only on a tiny scale. Begad! Blimey! Before placin' t' centerin' rings on, I tied t' Keelhaul®©™® around t' motor mount. Well, blow me down! Avast, me proud beauty! Then I added t' fore and aft centerin' rings and glued them into place at t' appropriate locations on t' cluster mount. Begad! I set this aside t' dry and began workin' on t' Triton.

T' Triton is an extremely simple rocket. Avast, me proud beauty! Well, blow me down! I removed t' laser cut fins from t' sheet, sanded them down, and shaped t' fins. Ya scallywag! Well, blow me down! I marked t' body tube (4 sides) then added t' fins one by one, makin' sure that they were on straight. Avast! Ya scallywag! I covered t' nose cone with a few coats o' yellow glue and sanded it down for a smooth finish. Avast! I then added t' launch lug t' t' rocket. Normally, shiver me timbers, I would have glued t' nose cone in (for an "authentic" Triton build), but since this rocket was bein' converted into a cluster rocket, I kept t' nose cone separate. Arrr! I screwed in a screw eye, removed it, and then added a little CA glue. Then I screwed t' screw eye back into t' nose cone for a nice fit.

Next step be t' add t' cluster mount t' t' Triton. Ya scallywag! Aye aye! This was very easy. Begad! All I had t' do be slide t' Keelhaul®©™® up through t' rocket, ya bilge rat, arrr, arrr, add some glue t' t' bottom o' t' BT-20, and then push t' cluster mount in so that t' bottom o' t' cluster mount was flush with t' bottom o' t' Triton body tube. Ya scallywag! I tied a short piece o' shock cord t' t' Keelhaul®©™® and then tied t' shock cord t' t' screw eye on t' nose cone. Avast! Blimey! I cut a piece o' streamer from mylar and fold/taped it onto t' shock cord.

Finishing:
Finishin' t' rocket is very easy. Arrr! T' balsa fins are straightforward t' prime, shiver me timbers, sand and paint. T' body tube is good quality and t' nose cone, ya bilge rat, although balsa, me hearties, is o' very high quality. Avast! Avast! It needed very little fillin' compared t' balsa nose cone from other companies. Begad! T' Triton is featured on t' cover art with an all yellow paint scheme. Blimey! I airbrushed t' rocket a few times and gave it a somewhat glowin' yellow color. Arrr! Aye aye! I am nay totally satisfied with t' plain yellow and will probably add a little black later.

Construction Rating: 5 out o' 5

Flight:
There is really only one motor choice available: T' Quest Micromaxx motors. Avast, me proud beauty! Ya scallywag! T' Micromaxx I motors are hard t' come by. Ya scallywag! I used t' more prevalent Micromaxx II motors. Avast! I also used t' new Quest Q2 igniters. Aye aye! They fit easily inside t' nozzle o' t' Micromaxx motors. Blimey! I held them in place with slivers o' balsa as plugs. I twisted t' igniter wires into two bundles. Aye aye! T' rocket is prepped with a bit o' waddin' t' protect t' streamer.

First flight be terrific with a quick boost. Aye aye! Since t' rocket is very sizable for a Micromaxx rocket, matey, I be able t' watch t' entire flight profile. Avast! Due t' t' motors' short delays, t' rocket was still in t' "nose up" position when t' streamer deployed. Aye aye! Still it be a very cool flight.

T' second flight was prepped identically t' t' first. Well, blow me down! On this flight, only 2 motors ignited. Arrr! T' rocket still had a nice boost, matey, although definitely nay as high as t' original flight. Begad! T' rocket be in t' nose up position when t' streamer deployed. Blimey! T' flight was still quite straight and certainly nay underpowered.

Recovery:
Both recoveries with t' streamer were flawless. Arrr! T' rocket shows no real signs o' wear. Ahoy! T' shock cord materials and streamer work fine.

T' only real con t' this rocket is preppin' Micromaxx motors for clusters. Well, blow me down! It is certainly a greater challenge than preppin' 13mm or 18mm clusters. Aye aye! You need steady hands and everythin' has t' be done gently. Begad! Avast! There is a certain art t' it. Ahoy! Igniters can be a problem. Avast! Aye aye! What I like about Micromaxx motors is that t' builder/flyer has t' improvise and develop his own supplies and techniques t' make it work. Avast! Well, blow me down! I often create me own igniters and igniter plugs. Ya scallywag! Avast, ya bilge rat, me proud beauty! I had t' build me own Micromaxx launch pad, shiver me timbers, me bucko, as t' Quest Silo Launcher is entirely incapable o' allowin' for cluster launches.

T' pros are t' rewards t' get from makin' a Triton cluster-capable.

Flight Rating: 4 out o' 5

Summary:
If you are lookin' for a real challenge without havin' t' spend a lot o' dough, me bucko, try t' Triton/Fliskits cluster conversion. Ahoy! Blimey! I am sure you will enjoy it as much as I have.

Overall Rating: 5 out o' 5