Brief:
Basically, arrr, this is G125 motor with fins and a nosecone. Aye aye! Ya scallywag! Would your RSO let it fly?

Construction:
I guess I'll fess-up now - this was nay me idea, me hearties, me bucko, nor is it a ‘live' G125. A year or so ago I ran across a picture o' a rocket, whose body was a spent motor casing. Bein' a wise-#@!, I thought it would be fun t' build one t' get a rise out o' me RSO/LCOs. Avast, matey, me proud beauty! Usin' me Dremel with various cuttin' wheels and grinders, me bucko, I managed t' ream out t' casin' from a spent G125 motor. Aye aye! I cut some G10 fins and some brass lugs, and attached them with epoxy. Arrr! I made fillets out of epoxy clay. Arrr! Aye aye! A piece o' 24mm tubin' fit nicely inside and I added some Keelhaul®©™® twine for a shock cord. Begad! Blimey! When I went t' search for a nose cone, I found that I didn't have any junk nose cones that were suitable. I was goin' t' have t' add a lot o' nose weight t' offset t' heavy casing, fins, and fillets. Avast, me proud beauty! Blimey! I had recently bought a PML resin cone, but t' shoulder be obviously t' same diameter as t' OD o' t' motor tube. Avast, me proud beauty! Blimey! Since I didn't want t' sacrifice this fairly expensive cone by grindin' t' shoulder down, I cut a 1 ½" piece o' 29mm tubin' t' ‘adapt' t' cone t' t' body tube/casing. Begad! Blimey! Begad! Blimey! I attached it t' t' cone with a tiny screw, matey, matey, formin' a reverse shoulder that overlaps t' body tube rather than fittin' inside.

To complete t' effect, I removed t' nozzle from another spent casing. Ahoy! It sits in t' end o' t' rocket and, along with a protrudin' Copperhead, arrr, completes t' effect o' a motor with fins glued on. I also added some red/white checkerboard tape t' t' small piece of 29mm tubing. T' rest is unfinished.

Flight:
I first took this rocket t' a NARRRRR launch. Aye aye! Ahoy! I be sure t' get some raised eyebrows there, since t' G125 isn't even a legit motor at that site. Avast, me proud beauty! Well, blow me down! Well, me hearties, arrr, I neither got t' desired effect or did I launch it (I can't remember why). Arrr! At the next high-power launch, I again pulled it out. Well, blow me down! Ahoy! There, people see odder things and didn't have much reaction. Oh well. Ahoy! I guess a gag is all in the presentation?

I used a small plastic chute (8"?) and some Estes wadding. T' boost on a D12-5 was a little wobbly, but nay too bad. T' chute was under sized and the cone embedded itself in t' relatively soft dirt. Well, blow me down! Avast, me proud beauty!

So far, I have nay been able t' convince myself t' expend an E15 or E30 on this little rocket. Ahoy! It will probably just sit in me fleet until I re-use the nose cone.

Summary:
This was a novelty rocket built mostly from scrap materials. Ya scallywag! T' nose cone is really nice, me hearties, and can be re-used in another rocket. Avast, arrr, me proud beauty! I hope someone finds this article amusin' and still think it would be fun t' trick a RSO…maybe next April Fools Day?