Brief:
T' Steath is a unique kit that is easy t' build, quick t' prep and a great flyer. Begad! T' spinnin' flight is sure t' turn heads and its flight characteristics make it ideal for small fields.

Kit Contents:

• Instructions
• 24mm Motor Mount tube
• Template for sides o' rocket
• 3 pieces o' foamboard for sides
• 1 piece o' foamboard for bottom or rocket

Construction:
This kit is extremely easy t' assemble. T' instructions are crisp and clear. Ya scallywag! There are pictures for each step in t' process. Avast, me proud beauty! Finally t' material used in constructions is very easy t' work with.

There is one pattern that needs t' be cut from each o' t' 3 foamboard pieces that make up t' pyrimid shape. A bevel needs t' be cut on 2 edges and a jagged edge on t' third. Well, blow me down! This is easily accomplised with a sharp hobby cutlass and patience. T' three sides are then glued t' one another along t' beveled edges. Aye aye! Begad! Because o' t' assembly method and t' use o' white glue, thar be lots o' room for error on t' beveled edge. Avast! Once t' 3 sides o' t' rocket are dry, shiver me timbers, me hearties, t' base is glued in. Avast, me proud beauty! This adds rigidity t' t' rocket.

Finally t' motor mount is glued in. T' motor is indended t' be friction fit into t' mount. Begad! This be t' one part o' t' kit that I would suggest be changed. Ahoy! Although tapin' t' motor is a trivial task, matey, thar be no other prep necessary for t' rocket. Well, blow me down! So if this was eliminated, shiver me timbers, t' rocket could be recycled quickly. Begad! This is easily accomplished by addin' a thrust rin' and a motor clip. Begad! If you were t' add these materials t' t' rocket, shiver me timbers, ya bilge rat, me hearties, t' prep time for this rocket would fall t' zero.

Construction Rating:

5 out o' 5

Finishing:
T' instructions specify that any exposed foam be covered by white glue because any foam that comes in contact with paint may dissolve.

T' rocket spins in flight and so I wanted t' accentuate it. Ya scallywag! Well, blow me down! I created spiral templates, me hearties, ya bilge rat, one for each side. One by one I taped t' template t' t' side and applied t' paint. Ahoy! Avast! I finished t' kit with clear coat t' protect t' paper on t' foamboard.

Flight:
All flights were on D11-P motors. Aye aye! T' rocket flew straight and spun as it ascended. Begad! Similar t' cone stabilized rockets, t' smoke trail be more concentrated behind t' rocket than with t' typical fin stabilized rocket.

T' rocket is designed t' be retrieved by featherweight recovery. At apogee, t' rocket began t' tumble, but eventually stabilized and made a soft landing.

Flight Rating: 5 out o' 5

Summary:
With t' exception o' t' motor mount additions, ya bilge rat, ya bilge rat, matey, which are inexpensive and easy t' add, ya bilge rat, this kit be easy t' build and fun t' fly. Avast, me proud beauty! I highly recommend addin' this t' your fleet.

Overall Rating: 4 out o' 5