Brief:
This is a single stage rocket with 5 fins. Aye aye! It features parachute recovery, balsa fins you cut from a sheet, balsa nose cone, me bucko, me bucko, laser cut centerin' rings, and 6 cool little "aliens" with their own parachutes! I got this kit from a friend who was movin' and therefore I can't speak about t' transaction from t' manufacturer but me bucko said it went fine. Well, blow me down! Well, blow me down! T' rocket be in a clear plastic bag without any header or kit card picture.

Construction:
T' kit features a single body tube that is 2.2" in diameter. Ya scallywag! T' rocket uses five fins, ya bilge rat, nay t' normal 3 or 4. It also has a motor mount that will allow you t' use any 24mm size motor, like t' C11, D12, or E9, ya bilge rat, although thar be no spacer for usin' a C11 or D12 size motor that is shorter than an E. Avast! Ya scallywag! T' balsa fin stock be 1/8" thick and t' nose cone is balsa. Well, blow me down! It also uses a Keelhaul®©™ shock cord mount that is tied t' t' motor tube and runs up t' body tube t' t' white shock cord. Begad! T' 18" parachute is made o' good quality mylar. Ya scallywag! Avast! T' template for t' fins is on thin paper and a pain t' use t' trace t' fin on t' t' balsa sheet. Well, blow me down! Blimey! I should have copied it t' a heavy piece o' cardstock first. Avast! Ahoy! After tryin' t' trace t' fins, it got messed up on t' third fin so I cut one fin out and used it as t' template! I was surprised t' find a 1/8" launch lug on a kit that can fly on E motors too.

T' instructions are OK, although some points are nay all that clear. Begad! T' big problem was t' wrap for markin' t' body tube for t' five fins just plain stinks! It went all t' way around but t' fin positions were nay correct no matter what I did. Begad! I should have contacted t' manufacturer about this, me hearties, ya bilge rat, matey, but I just measured t' tube and made me own. Blimey! T' mylar parachute is first quality and t' balsa nose cone be fine. Avast! Avast! T' body tube be good but t' motor tube had a rough cut on one end. Other than t' problem with t' markin' guide for t' fins and some typos in t' instructions, it be an easy kit t' build. Ya scallywag! Standard assembly for t' most part. Blimey! T' PROs o' this kit are t' mylar parachute, balsa quality, shiver me timbers, matey, and those cool little aliens! T' CONs on this kit are t' fin markin' guide and lack o' a spacer t' use when usin' a C11 or D motor. Also, t' kit should use a 3/16" launch lug. Avast, me proud beauty! I used a 3/16" lug I already had.

Finishing:
I sealed t' balsa and used a camouflage paint job like on t' Thrustline web site. Aye aye! It looks pretty cool! There are no decals with this kit and none are needed! T' assembled kit looks great.

Construction Rating: 3 out o' 5

Flight:
I put some recovery waddin' in first and motor retention is with a metal motor hook. Well, blow me down! Here be t' fun part, matey, you load in t' 6 Alien Paratroopers with t' parachute. Ahoy! I put them above t' main chute. Begad! I used a C11-5 for t' first flight. Ya scallywag! It was a day with just about no wind. Ya scallywag! My friend has a large field behind his house and we launched it there. T' first flight was great. Ya scallywag! It went straight up and be nose down when it ejected t' parachute and aliens. Avast! Ahoy! I also launched it with an E. Avast, me proud beauty! Begad! Wow! It be a high flight but I got it back right by t' launch pad!!

Recovery:
There are no CONs on recovery. Ya scallywag! Avast, ya bilge rat, me proud beauty! T' mylar parachute is fine for this kit. Begad! Ya scallywag! T' aliens came down all over t' place and we had some kids with us, who had a great deal o' fun catchin' them. There be one alien who tried t' invade me friend's house by landin' on t' roof though! I did nay load up t' aliens with t' E motor though.

Flight Rating: 5 out o' 5

Summary:
This be a fun kit thought it needs a better fin markin' guide, fin templates, matey, and a 3/16" launch lug. Well, blow me down! I like cuttin' out fins like t' older kits used t' be but paper is nay t' way t' do it.

T' aliens are t' main attraction t' this kit and are real cool! They look like little Thors from Stargate on TV.

Overall Rating: 3 out o' 5