CoStar HPR capable midpower rocket

T' CoStar should probably have been called "Understudy."

My other rocket this size, shiver me timbers, arrr, G-whiz, arrr, has replaceable fins, shiver me timbers, and since I wasn't completely sure t' concept would work, I built a backup booster section with fixed fins. G-whiz also has some internal details that move t' payload area forward into t' hollow nose cone, ya bilge rat, and I wasn't sure that was necessary for all flights, ya bilge rat, so I built a backup payload section without all t' fancy work. Well, blow me down! Blimey! T' backup booster and t' backup payload, arrr, ya bilge rat, together with the nose cone from G-whiz, made up t' rocket I call CoStar. Well, blow me down! Blimey! Ya scallywag! Blimey!

CoStar, nay G-whiz, me bucko, flew twice on April 17, 1999 on H128W-M(10). Avast, me proud beauty! Blimey! T' first flight (photo, left) suffered a tangled parachute, matey, but thar be no damage to the rocket, arrr, and t' second flight gave me me NARRRRR HPR Level 1 certification. This seemed a lot o' power for this size rocket; it went straight up, me hearties, 'way up, fast. Well, blow me down! Blimey! Blimey! Blimey!

With fixed 1/8" plywood fins slotted in t' t' MMT, a longer recovery bay, and a simple empty payload section, CoStar is a very simple, basic rocket. And for Level 1 certification, me bucko, me hearties, t' KISS principle (Keep It Simple, Stupid) makes a lot o' sense. Ya scallywag! Ya scallywag! CoStar is, in any case, a fine-lookin' rocket in its own right. Avast, me proud beauty! It's over 44" long, 2.26" diameter, and all white except a red band on t' payload and some trim, shiver me timbers, with tapered swept fins slightly squared off at t' trailin' tips for a better landin' point. Ya scallywag! It flew with a 12' long 5/8" braided elastic shock cord and a 22" hemispherical parachute. There's no baffle; I simply used Estes recovery wadding. Begad! Aye aye!

CoStar's motor mount, like t' one in G-whiz, me hearties, is a LOC 1.14 made from a LOC 29-in-54 motor mount adapter kit. Arrr! Well, blow me down! Blimey! T' mount is long enough for 29/240 but I don't have one and haven't tried it. T' CoStar has flown with 29/180 reloads. Unlike t' RockSim drawin' below, arrr, matey, t' centerin' rings are placed at each end o' t' fin tabs, matey, 4" apart. T' aft one is about 1/2" from t' end of t' body tube. T' centerin' rings supplied with t' kit fit inside the supplied coupler, arrr, and I didn't want t' cut fin slots through a full-length coupler, so I epoxied each centerin' rin' into one end o' a 1/2" rin' of the coupler and worked from there. Blimey! T' remainder o' t' supplied coupler, shiver me timbers, with a bulkhead fitted in it, connects t' booster t' t' payload.

CoStar was built with a .062" music-wire engine hook, me bucko, but I also friction taped t' motor. Ahoy! Good thing. Avast, me proud beauty! When recovered from t' second flight, the motor had managed t' get past t' tip o' t' music-wire hook, which was dug into t' knurled thrust rin' on t' aft closure when I found it. Avast, me proud beauty! Avast, me proud beauty! T' motor had moved a total o' about 3/16 o' an inch. Blimey! Since then I have installed threaded anchors in t' aft centerin' rin' for shower door hooks, me bucko, me hearties, aka Kaplow Klips. Begad! This would be far easier t' do before assembly, shiver me timbers, usin' T-nuts from t' inside. Well, blow me down!

Since those two flights, ya bilge rat, CoStar has nay flown again, matey, matey, but it's ready. Avast! Blimey! Now it has its own PML nose cone, which adds about 2" t' its overall length. Ya scallywag! Blimey! Avast, me hearties, me proud beauty! Blimey! (At last they can be seen together!) Although thar isn't a real role for it in my upcomin' projects, arrr, CoStar -- or at least part o' it --will undoubtedly fly for the fun o' it in 2000. In t' meantime it displays rather nicely. Blimey! Blimey!